Low loader

Goldhofer STZ-VL3-38/80A

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Iodpjrq D Nisfx Anvjau The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: excellent (used), Year of construction: 2022, operating hours: 208 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides Isdpfx Aoxd T Hcsnvoau - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Iaedevzxg Tjpfx Anvju Article number: 8143983 Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Ijdpfx Ajn Htktonvoau

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be set up Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4,650 x 2,400 x 3,100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 controller - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions: 3,500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x polishing stations, - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Gripper change cabinet Iasdpfx Aog Saqvenveu Belt conveyor Interoll Automation GmbH - Total length approx. 2,000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to customize every detail as shown in the video.

Condition: good (used), functionality: fully functional, mileage: 5,40,000 km, power: 323.62 kW (440.00 HP), first registration: 07/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,300 mm, Year of construction: 2011, Equipment: ABS, crane, cruise control, differential lock, hydraulics, Good condition! Ready to drive! Iaedpfoufch Dex Anvju 6X4 LEAF/AIR SUSPENSION Crane Hiab 211-5 with radio (year 2011) 5 extensions with rotator (15m) Euro 5

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 17,320 mm, loading space width: 3,200 mm, loading space height: 400 mm, total length: 17,320 mm, total width: 3,200 mm, suspension: hydraulics, tire size: 245/70 R 17.5 | 143/131L (146/146F), color: beige, Year of construction: 2021, Color: Yellow Load capacity: 64,800 kg Main Features Manufacturer: Faymonville Type: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year: 2021 Weights/Loading Capacity King-Pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg GVW: 84,200 kg Empty weight: 20,200 kg Loading capacity: 64,800 kg Axles Pendle axles Hydraulic suspension All axles hydraulic steering WABCO braking system with EBS-E Tires: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Length: 17,320 mm Loading floor length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Loading floor width: 2,750 mm / 3,200 mm Loading floor height: 400 mm Ground clearance: 150 mm King-Pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz Diesel powerpack Hydraulic operated Gooseneck Aluminum side boards on Gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless Steel Toolbox Spare wheel + holder Rear bumper with lights King-pin 3.5” Central greasing with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2021 Axle Configuration Tire size: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: Double tires; Lift axle; Max. axle load: 12,000 kg; Steered Rear axle 1: Double tires; Lift axle; Max. axle load: 12,000 kg; Steered Rear axle 2: Double tires; Lift axle; Max. axle load: 12,000 kg; Steered Rear axle 3: Double tires; Lift axle; Max. axle load: 12,000 kg; Steered Rear axle 4: Double tires; Lift axle; Max. axle load: 12,000 kg; Steered Weights Empty weight: 20,200 kg Payload: 64,800 kg GVW: 85,000 kg Isdpfx Anjvzaaneveau Functional Loading platform height: 40 cm Extendable superstructure: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. Iaodpfx Anjiq U Tqovsu SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 5 h, functionality: fully functional, overall weight: 150 kg, load capacity: 6 kg, arm reach: 1,445 mm, repeat accuracy: 0.06 mm, Industrial welding robot with a payload of 6 kg and a reach of 1445 mm. Iaodpfxeqcunas Anvou The robot served as a demonstration exhibit.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 12 kg, permissible axle load (axle 2): 12 kg, permissible axle load (axle 3): 12 kg, loading space length: 18,520 mm, loading space width: 2,750 mm, loading space height: 450 mm, total length: 18,520 mm, total width: 2,750 mm, total height: 450 mm, suspension: hydraulics, tire size: 245 / 70 R17.5 | Load index 146/146F, color: white, Year of construction: 2014, Colour: White Wheelbase: 136 cm Payload weight: 53,800 kg Cargo floor height: 45 cm Extendable Braked Manufacturer: Golfhofer Type: STZ-VP 3-55/80A VIN: WG0STZV39E0036631 Year of manufacture: 2014 Weights: King pin load: 35,000 kg Axle load: 12,000 kg Total axle load: 36,000 kg GVW: 71,000 kg Empty weight: 17,200 kg Loading capacity: 53,800 kg Measurements: Length: 15,520 mm + 3,000 mm extension Loading floor length: 6,300 mm + 3,000 mm Loading floor width: 2,750 mm Iaodsxyh I Tepfx Anvou Loading floor height: 450 mm Bogie height: 1,100 mm (+385 mm / -215 mm) King pin height: 1,390 mm Axles: BPW eco Pendulum axle All axles with hydraulic steering Tyres: 245/70R17.5 ABS / EBS Additional information: 1x Extendable Hydraulic operating system powered by the truck’s PTO Detachable gooseneck with front loading ramps Excavator trough Radio and cable remote control Lashing rings Stake pockets Wooden loading floor Stainless steel toolbox 2x Spare wheel + holder Working lamps Rear bumper with lights King-pin 3.5'' Central lubrication system Beka-Max = Further information = General information Year of manufacture: 2014 Axle configuration Tire size: 245 / 70 R17.5 | Load index 146/146F Axle brand: BPW Hydraulic Pendulum axles Suspension: Hydraulic suspension Rear axle 1: Double-tired; Max. axle load: 12 kg; Steered Rear axle 2: Double-tired; Max. axle load: 12 kg; Steered Rear axle 3: Double-tired; Max. axle load: 12 kg; Steered Weights Empty weight: 17,200 kg Payload: 53,800 kg GVW: 71,000 kg Functional Extendable superstructure: Yes Condition Technical condition: good Optical condition: good Financial information Price: On request