Beer filtration plant; built between 1979 and 2011

Gross, Filtrox, Steinecker, H&K

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Kdjdscx Smbspfx Af Hst Max. Pressure : 6 bar incl . electronic control incl . booster pump

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings Ksdpfsw U A T Isx Af Hedt

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Capacity 1000 Lts Kjdpfx Aswq Sdisf Hodt Complete with Winkworth mixer and ancillary equipment

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Kedpfx Ajxfvh Sjf Hodt

Condition: used, Year of construction: 2013, Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Technical data  - Capacity: 250 liters per batch - Application: Brewing - Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) - Heating system: Electric - Temperature control: Automatic - Safety system: Thermal safety alarm Kedpfeyw Abfjx Af Hedt - Cooling: Plate heat exchanger - Electrical supply: 400 V, three-phase - Installed power: 15 kW Scope of Delivery  - Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control - Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmission surface: 0.63 m², Design pressure: 10 barg, Volume: 1.5 L, Design temperature: 0 – 100 °C - Malt mill | Sommer | Piccolo 11S | 2013 | Capacity 100–150 kg/h

Year of construction: 1991, condition: used, 2 vessel brewhouse, copper cladded (knock-out wort 13 hl). Both brewing vessels are constructed from stainless steel with copper cladding. The wort kettle is equipped with electrical heating mats. Alternatively the kettle could be retrofitted for heating via steam, which would be possible with relatively low additional investment. Additional title: 13 hl knock-out wort Capacity: 13 hl/brew Duration per brew approx.: 8 h Power: approx. 34 kW (heating mats) Material: stainless steel, copper cladded Kdjdpfxexbn R Ds Af Hjt Features: 1 mash-/lauter-tun, 1 wort kettle with hop strainer (electric heating, heating zones: 2 x frame, 1 x bottom), both vessels with temperature display, 2 Hilge pumps (type: Durietta I-200-5/0,25/4, (Q: 2 - 3 m³/h, H: 5.0 m)

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Kdedpfx Afjxzquls Hst Feed: 10000 l/h Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6,5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2,5 - 5 bar Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Kedpfjvcqnlex Af Hedt Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: excellent (used), Year of construction: 2015, Ziemann 300hl Brewhouse System with Mill Room for sale Year 2015, upgraded in 2020. Capable of 16 Brews per day, due to 2nd Lauter tun added in 2020 Location: UK Kodjtt S Sxspfx Af Hedt Get in touch with Indassol for further information and pricing

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm Kjdpfx Aeyhzq Asf Hsdt External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.