CNC Circular Grinding Machine

GSN PF5 UM100

Condition: excellent (used), Year of construction: 2013, Siemens Sinumerik 840D control Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper band filter Pjdpjwwtq Defx Akfegk Centre tip Diamond dressing plate Grinding wheel change assist

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline Pgedpfx Akow Intaofsk --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Pgsdpfx Asw Rgcfskfjk Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Pgsdpfx Aksv Igg Iofsk Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Pgjdpfx Akjyz Dwcofok Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: used, Year of construction: 2000, functionality: fully functional, grinding width: 2,600 mm, workpiece weight (max.): 35,000 kg, grinding length: 12,000 mm, distance between stands: 2,800 mm, grinding height: 1,600 mm, Portal Grinding Machine 12x2.6m Brand: GIORIA Year:2000 Controller: Pgsdswql H Depfx Akfok Siemens 840C (twin operator panel with HPU) Table: 12.500 x 2.600mm Heigh feed: 1.600mm Hydrostatic table Including grinding disc etc.

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Pjdpfxovygwwo Akfsgk Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,900 h, functionality: fully functional, DMG Mori CMX70U No. 001240A Year: 2022 Weight: 7,800 kg Pgjdpoyzb Ifofx Akfok Spindle hours: approx. 1,900 (only plastic or aluminium has been machined!) Control: DMG Mori Slimline incl. Bürener coolant preparation system incl. 3 x Kesel machine vices incl. 50 x SK40 tool holders Available from 20.04.2026!

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 700 mm, Manufacturer: PAMA Model:SPEEDRAM 1 CNC Year1996 Spindle:140mm. Tranversal travel:10.000 mm. Vertical travel:2.600 mm. RAM travel:600 mm. Ram Size: 360x320 Spindle travel:700 mm. Spindle taper:ISO 50 Spindle motor power:50 Kw. Spindle speeds: 6 ÷ 2000 Rpm. Cnc:CNC Selca 3045 ATC: 60nos. Total weight:65 Tons. Pedpswzh Apjfx Akfogk Features and Accessories Complete with: - n. 1 automatic universal milling head - n. 1 Floor plate 6000x2500x300mm -n. 1 Floor plate 4500x2000x300mm - Rotry Table 2000x1600 with long travel 2000mm -Loading capacity on table:15ton - levelling shoes

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine can be used as a fully-fledged universal machining centre! We offer you: Manufacturer: DMG MORI Type: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical specifications: Travels: X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotary range: 360° Swivel range: +/- 120° Main spindle: Max. speed - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm, integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool stations: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Tool change time (chip-to-chip): 6.5 sec Feed rates: Rapid traverse: 40 m/min Laser specification: Laser type: Fibre-guided diode laser Power: 2,500 W Fibre diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Technical features & accessories: - Automated changing of the laser processing head for laser deposition or milling operations - Production package, consisting of: - Scraper-belt chip conveyor - Coolant system, 600 l tank - Paper band filter - High-pressure coolant (IKZ) 40 bar - Chip rinsing in the work area door - Rinse gun, 3 bar - Oil and emulsion mist extraction system Pgjdpfjyz Si Tex Akfsk - Blown air cooling device through spindle centre - Infrared probe, make Renishaw PP60 optical (OMP60) - Tool measurement in the work area, make Blum Laser - Preparation for 3D quickSET - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Grating footboard - Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air chiller for laser and processing head - Second collimation optic for 1.6 mm laser spot diameter - Alignment camera for laser/nozzle adjustment - incl. adaptive process control - incl. extraction system with post-filter stage - Active laser safety window - Extended powder feeder, consisting of: - Twin system (dual-channel material feed) - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for consistent material build-up - Automatic switching or mixing via simultaneous operation of both powder containers by NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Safety package for power failure Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Modifications and errors in technical data and details, as well as prior sale, are subject to change!