Marking prism

Guss 170/90/H200 mm 90°

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm Gjdpfx Aov Adi Asd Uoip -Weight: 8,8 kg

Condition: new, table length 330 mm Gisdpfxoupw Twe Ad Uop table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable

Condition: as good as new (ex-display), Year of construction: 2025, Power: 0.85, 1.5kW Speed range: 300 - 4000 rpm Speed steps: stepless Gedpfohpmbbex Ad Uoip spindle mounting: MK-3 Drilling stroke: approx. 105 mm spindle throat: 200 mm Weight: 152 kg

Condition: new, Load Weight Shelf 12000 kg Loading weight per level 2000 kg Number of load levels 6 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm dimensions 2,3 x 0,9(1,35) x 2,45 m Giedpefgyg Rsfx Ad Ujp

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Godst Hwuvepfx Ad Usip Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Giedpfsc U U Udsx Ad Uep Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Condition: used, Bezel, steady rest, lynette -Bezel: max. passage Ø 400 mm -Center height: 345 mm Giedpfx Ajiaqm Ued Ujp -technical drawing: with the photos -Total dimensions: 930/165/H890 mm -Weight: 98 kg

Year of construction: 1998, condition: excellent (used), 1/2 lunette Gisdjfgwi Tepfx Ad Usp steady rest suitable for diameter 500 mm SPH 450 mm quill diameter 100 mm

Condition: new, - 3-axis position indicator - magnetic and manual spindle brake - 3 jaw chuck ø 250 mm - 4 jaw chuck ø 320 mm - Z-axis stop - fixed & rotating lunettes - Multifix type B including 4 holders - faceplate ø 430 mm - lighting system - coolant system Specifications - Distance between centers: 2000 mm - Swing diameter over bed: 600 mm - Swing diameter over slide: 360 mm - Swing diameter in cutout: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle taper: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 levels) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical pitch: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Cross feed: 0.036 - 2.019 mm/rev (66 steps) Gisdpfxjvxgtis Ad Uop - Tool holder: 25 x 25 mm - Tailstock quill diameter: 65 mm - Tailstock quill mount: MK5 - Tailstock quill stroke: 120 mm - Motor power: 7.5 kW - Voltage: 400 V - Dimensions WxHxD: 3460 x 1800 x 1150 mm - Weight: 2250 kg

Condition: new, Load Weight Shelf 15000 kg Giedpfx Adsfgyg Ej Ujp Loading weight per level 3000 kg Number of load levels 5 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm dimensions m