Drilling device

unbekannt unbekannt

Condition: used, Steel wire ropes, wire ropes, steel lifting slings Length: 10 m Diameter: 25 mm Nedpfx Afjgzpw Ijascn Loops right/left Load capacity: 5 t. 6 pieces available

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) Ncsdpfxjcggy So Afasn - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: new, functionality: fully functional, Year of construction: 2025, total height: 150 mm, total length: 4,000 mm, total width: 300 mm, load capacity: 16,000 kg, forkExtension Producing company Unbekannt Type Unbekannt Year built 2025 Height (mm) 150 Length (mm) 4,000 Lifting weight (kg) 16,000 Retraction lugs height (mm) 140 Retraction lugs width (mm) 280 Ncodpfx Asx Haw Nofasn Width (mm) 300

Condition: used, used, good conditionnumber of tiers 14tier depth approx. 550 mmspace requirement approx. 1200 mm x 800 mm x 175 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Ncjdpfx Ajwi Rn Defajn

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from Nedpjdt Rgvofx Afaecn lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, with rear wall, lighting, power supply, compressed air supply, hanging system rail, workpiece clamping with height-adjustable support used, make unknown table size 2400 mm x 800 mm external extraction power sockets 220 V 5 pieces compressed air couplings 3 pieces running rail with hanger 4 workpiece clamping 2 pieces Nsdpfxsvwgine Afaocn workpiece supports vertical connection diameter 160 mm space requirement approx. 2400 mm x 1000 mm x 2200 mm storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition, as inspected, without guarantee and warranty

Condition: used, thickness of jaw 500 mm Njdpfxevwftfo Afascn Milling fence for table milling machineswith new wooden fence jaws for self-mountingfence jaws are supplied and only need to be adjustedjaw length 500 mmmilling fence with fine adjustmentstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee

Condition: used, Year of construction: 1966, max. tractive force 5 t, max. stroke 850 mm, max. cutting speed 12m/min, max. return speed: 25m/min, clamping surface 410x575 mm, groove width 3 - 90 mm, bore 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base under floor 1.400 mm Nodpfx Afscm Elnsaocn

Condition: good (used), 8 pieces, mobile aluminium dock levellers, – used – : Price per unit ex location: Type 1: standard (approx. 5 pcs) only €650 (net)! Type 2: with two lateral tread plates (approx. 3 pcs) only €850 (net)! Manufacturer: unknown, possibly Altec Type: unknown, possibly HF 09 Year of manufacture: unknown Width approx. 1.50 m Length including movable ramp flaps at the ends: approx. 2.35 m Load capacity: unknown, possibly 1,800 kg Nodox R Duyopfx Afajcn Dead weight: unknown, possibly 107 kg New price approx. €1,900 (net) Condition: good Available: immediately Location: Niedernberg near Aschaffenburg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Nsdpfxsd I Hixo Afaocn -Speed: 3700/116 rpm -Power: 0.18 kW 24 V. -Diameter shaft: 17 mm -Length: 45 mm -Weight: 6 kg -Dimensions: 215/170/H420 mm -Weight: 17.3 kg/piece

Condition: excellent (used), 1 permanent - magnetic Chuck D = 315 mm with mounting flange DIN 55027 Gr. 6 Njdpfx Afed Eaaueascn

Condition: used, Gearboxes, pinion gears, angular gears, transmission gears -Translation: 41:1 -Drive shaft: Ø 18 x 25 mm Nodjd Rzc Ejpfx Afascn -Hollow shaft: Ø 40 x 130 mm -Price: per piece -Number: 2 pieces -Dimensions: 300/150/H260 mm -Weight: 12.5 kg/piece

Condition: used, 24 pieces available Ncedpfx Afsdc A Rpoaon

Condition: new, maximum load weight: 549 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,500 mm, loading space width: 1,420 mm, loading space height: 350 mm, loading space volume: 1.4 m³, color: other, construction height: 960 mm, working width: 1,490 mm, Manufacturer: Brenderup Type: Brenderup 3251T, 3251ST UB high loader steel Perm. total weight: 750 kg, tandem unbraked Payload: 549 kg Empty weight: 201 kg Box dimensions: 2500 x 1420 x 350 mm Tires: 10 inch Loading height: 610 mm All side walls can be removed and folded down Price includes Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. Brenderup uses galvanized components that optimally protect the trailer against rust, user-friendly locks, the tarpaulin buttons are attached to the trailer as standard, V-safety drawbar, 4 x internal lashing eyes, 13-pin plug with reversing light, V-safety drawbar, 13-pin plug with reversing light. Plug with reversing light Ncodpfed T Szujx Afasn

Condition: used, Technical details: band width: 135 mm conveying height: 1020 control voltage: 380 V weight of the machine approx.: 165 kg dimension machine xH: 3,3 x 0,5 x 1,5 m Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm Ncjdpfx Afju Nuquoajn -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20mm -Discharge length (D) 200mm -Discharge height above floor (C) 1020mm -Discharge width 200mm -Insertion length/underfeed length (A) approx. 2000mm -Insertion height (B) 180mm Operation via manual switch Rotating scraper brushes at the discharge and on the left/right side of the infeed beam *