Gear Testing Machine

HÖFLER EVTM

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Hedpfx Adjrgahxswofb

Condition: ready for operation (used), Specifications Manufacturer NILES Model ZSTZ 08 CNC Condition Used Stock Number in fabbrica Max diameter 800 mm Max module 14 Hfodpfewgnmfjx Adwob Min-max number of teeth 5-315 Machine weight 14500 kg Machine dimensions 6000x3500x2800 mm min-max grinding wheel revolution 100-1250 rpm Description Equipped with New electrical system

Year of construction: 2009, condition: good (used), Load capacity: 30 t Hsdpfeqiz N Rex Adwofb Fine lift Lifting height 9 meters

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis Hodpfx Adjkwcdbowsfb 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, GP300 CNC gear hobbing machine, WET AND DRY MACHINING available as required. Both options are freely selectable. Siemens 840D Solution Line, 5-axis system, suitable for shaft and disc-type workpieces. Max. Ø300 mm, max. module 6, swivel range ±45°, axial travel 440 mm, hobbing power 15 kW, HSK-B80, table Ø300 mm, direct drive, speed 90–900 rpm. High precision, digital drive technology (Sinamics S120), automatic head positioning 0.001°, linear guides, safety retraction, temperature compensation, full enclosure. Hjdjxqn Tqopfx Adwsfb

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V Hedpfxowvbqie Adwsfb – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Hedpfx Aderuakgswofb Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: ready for operation (used), Max. external diameter (gear): 630 mm Max. internal diameter (gear): approx. 750 mm Hfsdpfxew S T Uws Adwob Max. tooth width: 180–200 mm Max. module: 8 Stroke: up to 220 mm Strokes per minute: 47–300 strokes/min Tool holder: MK 4 Drive capacity: approx. 8 kW Total connected load: approx. 10–12 kW Machine weight: approx. 5,500–5,800 kg The machine has been in storage in Langenfeld since 04.09.2025. It is currently being cleaned and can be inspected by appointment.

Condition: new, Delivery program Eifco hobbing machines Hedpou Egdlofx Adwsfb

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Hfedpfx Adehpqquswob Max. Tool diameter: Ø 95mm Weight: 4,8to