Band Saw - Automatic - Horizontal

HBM MBH 128

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm Hodpfsq Evn Esx Adwsng - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm Hodperz Tutefx Adweng - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,770 mm, total length: 5,930 mm, Diesel forklift Linde H 50D-01/600 Hodpfx Adoxd El Rswsng Drive Diesel Year built 2023 Lifting height (mm) 3,770 Lifting weight (kg) 5,000

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW Hnsdpfx Aeilk H Tjdwog connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: new, Year of construction: 2025, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels Hnodpfewq A Dyjx Adwog User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Hjdpfswzzgnex Adwong Subject to price changes, errors, printing and typographical mistakes excepted.

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Hnedpfx Adegculvewsg Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Hjdpfjvxhfmjx Adwsng Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg

Condition: new, cutting diameter 225 mm Hnjdpfxogxi D To Adwog saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, Year of construction: 2025, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Hnodpfx Adsw H Rdmewsg Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards