SHEETFED OFFSET

Heidelberg Printmaster PM 52-5+

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Gkedpeyx Uy Aefx Ap Djc Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: pm740725, color channels: 4, counter reading (color): 35,77,88,902, Equipment: documentation/manual, machine is in a good condition. we are shortage of space and so we took some photos and videos before we moved machine to storage. in case of real interest we can reinstall machine for customer for test. if interested i can send video of machine also. Gkedpez A U Dqjfx Ap Doc

Condition: used, Year of construction: 2006, Flatfeeder 4 pockets, 1 knife Gkjdpfx Apsx H Sq Is Djc 2 side pockets delivery LCV-54, Available: at short term

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Technical data and description: see pictures Gjdpfsh Eii Tsx Ap Dskc

Condition: used, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic Gedpfx Apoyctybs Dokc - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Digitale Etikettendruckmaschine SurePress mit Tintenstrahltechnologie / Digital Label Press with Inkjet Technology Digitale Etikettendruckmaschine / Digital Label Press Epson Sure Press L-4033AW Baujahr / Year 2016 - Serial-No. RXH0000088 Maximale Druckauflösung / Maximum Print Resolution: Papier / Paper 720 x 720dpi Film 1440 x 720dpi Rollbedruckstoff Durchmesser max. 100mm Gedjyx Ar Hjpfx Ap Dekc Druckgeschwindigkeit / Print Speed: Bis zu 5 m (16') pro Minute bei 720 x 720 dpi (auf Papier) / Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Die Epson SurePress L-4033AW ist eine industrielle Inkjet-Digitaletikettendruckmaschine, die speziell für den Etikettendruck in hoher Qualität konzipiert wurde.  Besonderheit, das weiße Tintenset (AW = Auto White) ermöglicht den Druck auf transparenten Filmen und metallischen Substraten. The Epson digital label press capitalizes on Epson's acclaimed MicroPiezo® ink jet technology to create output with smooth gradations and incredible color quality. The L-4033A has six-color (Cyan, Magenta, Yellow, Black, Orange and Green), industrial-quality, water-based ink set produces a remarkable range of colors for impressive, professional and consistent results.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2026, 540×250 Surface Grinder (MYS1022) is a compact machine designed for precision grinding of small and medium-sized metal components. Its robust construction and advanced technologies ensure high machining accuracy and reliable operation in demanding industrial environments. Main advantages of the 540×250 (MYS1022) surface grinder The 540×250 (MYS1022) magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as hydraulic feed in two axes and precision guideways with a solid construction, ensuring reliability and high machining efficiency. Its compact dimensions and high accuracy make it an excellent choice for smaller workshops and production facilities where space is limited. Key benefits include: High grinding precision – maximum grinding area of 540 × 240 mm and transverse feed accuracy of 0.02 mm ensure excellent surface finishing quality. Compact construction – dimensions of 1800 × 1400 × 1800 mm and a weight of 900 kg allow easy installation in smaller production facilities. Smooth hydraulic feed system – two-axis feed system enables precise movements with transverse speed up to 600 mm/min, ensuring efficient machining. Stability and durability – robust construction with double guideways minimizes vibrations, guaranteeing stable operation during intensive use. Easy maintenance – centralized guideway lubrication reduces manual maintenance requirements and increases machine availability. Ready for operation – the machine is fully equipped for immediate production, minimizing setup and downtime. Machine design and technology Robust construction and precision components The MYS1022 surface grinder features a heavy-duty construction weighing approximately 1000 kg, providing excellent stability during machining operations. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishes. The spindle, driven by a 1.5 kW motor, operates with a grinding wheel measuring 200 × 20 × 32 mm, enabling efficient processing of various metal materials. Technical specifications Parameter Value Gkedpfx Askkcm Uep Dec Table dimensions 500 × 250 mm Longitudinal / transverse travel 560 × 260 mm Maximum grinding area 540 × 240 mm Maximum distance from table to spindle centerline 490 mm Table guideways Double guideway Transverse movement per vernier scale division 0.02 mm Transverse movement per handwheel revolution 2.5 mm Vertical movement per vernier scale division 0.01 mm Manual vertical movement per handwheel revolution 1.25 mm Grinding wheel dimensions 200 × 20 × 32 mm Grinding wheel speed 2850 rpm Main motor power 1.5 kW Hydraulic oil tank capacity 80 L Hydraulic pump motor power 1.5 kW Coolant pump motor power 40 W Machine dimensions 1800 × 1400 × 1800 mm Weight 1000 kg Standard equipment Magnetic table Grinding wheel Grinding wheel holder Cooling system Chip separator with magnetic filter Halogen lighting system Technical documentation (DTR) CE declaration

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 356257, Heidelberg KORS offset printing press, 1-color, machine number 356257, 52 x 72 cm, in good condition, immediately available. Godpfx Ajzkb U Iep Djkc If you are interested, we will also be happy to provide you with information about other machines we have in stock. You are welcome to inspect the machine at our facility, subject to prior appointment.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Full line screen printing machine Trumax Feeder Sakurai SC 102 DX - 1995 - stop cylinder model Gjdpfx Apjymv Dks Djkc Trumax 2 Lamps UV dryer with hot air module Trumax Hyperstack Max speed 5500 per hour ! Full documentation Max size of sheet1050 x 750 мм. Min size of sheet Около 420 x 297 мм. Printing size1020 x 700 мм. Thickness 0.1 to 0.8 мм.

Condition: good (used), Year of construction: 2006, functionality: fully functional, StitchLiner5500 - saddle-stitching system which flat sheet collating, scoring, folding, stitching and three-knife trimming in line. Line with: 2 Collator tower VAC 100 – (total 20 bins). Gjdevzgy Uepfx Ap Dekc Stacker/By-pass Unit: ST-40 Conveyor ST-CV Accumulator/Folder : ACF-30 Saddle-stitcher: SPF-30 Three-knife Trimmer: HTS-30 Options: 4 Stitching Head Center-Cut Device Additional Loop Stitching Kit Available Immediately - Can be inspect in production