Conveyor belt

Herber GF-2010-NB-500-MA

Condition: good (used), Year of construction: 2010, Belt conveyor, Herber, approx. 4.10m long - second-hand - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos46 Manufacturer: Herber Type: GF-210-NB- 500 MA.bl Tsdeu Etv Ispfx Ac Nsf Year of construction: 2010 Length: approx. 4,10m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Year of construction: 2023, condition: new, Ultrasonic cleaner with PLC, specially designed for medical needs. Capacity: 50 Liter Tedpfx Acjfg Eqwe Nof Automatic filling: Available Automatic dosing: Available Lid: Pneumatic piston Programmable: Yes with PLC Liquid level control: Available ultrasonic cleaner, ultrasonic degreasing machine, ultrasonic washer, small ultrasonic washing machine, medical ultrasonic cleaner, automative

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Tjdpfx Ajfzk Ewsc Nsf In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: excellent (used), Year of construction: 2010, Kuka KR 16-2 Year of manufacture: 2010 Todpfxovx Ayre Ac Nof Payload: 16 kg Reach: 1611 mm Control: KRC2ED05

Condition: good (used), Year of construction: 2008, Industrial robot Manufacturer: Kuka Model: KR60-3 Year of manufacture: 2008 Tsdounk Ixopfx Ac Nof Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka control system KRC2ed05 Weight: 185 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 7m/15m 251125ä 1 unit

Condition: refurbished (used), PRICE ON REQUEST! - 5 x used & tested completely overhauled, all wear parts renewed - completely measured - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,02 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Todeg A Iv Eepfx Ac Nef Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. Tjdpsv S Dihsfx Ac Nof While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, The KR 16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing Todpfx Acsq A Uiuj Nof - Additive Manufacturing Model: KR16 Standard & Foundry ( more option is also available ) Condition: Used & Tested Year: 2008 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: used, - Power consumption: 26 kVA 3P400V /N/PE/50HZ; protection 63A - Compressed air connection: min. 5 bar, max. 7 bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa, min. 20 m/s, follow-up time 15s The system has been cleaned, packed by the manufacturer, preserved, and stored. It is complete and ready for operation. The system can be inspected at any time by appointment. Tsdpfxjwpkc Ie Ac Nsf

Year of construction: 2012, condition: ready for operation (used), A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible. Tsdpoxdm Uasfx Ac Nof