Used Chiron Fz 08 for sale (110)

Year of construction: 2010, condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg Hnedjiy D Tmopfx Aabou For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: excellent (used), Year of construction: 2005, operating hours: 9,100 h, functionality: fully functional, machine/vehicle number: 414-38, TECHNICAL DATA Hnsdpfx Aaskx Ek Tsbsu Travels  ; X / Y / Z 450 / 270 / 310 mm. Acceleration ; X / Y / Z 0,7 / 0,7 / 1,0 g Fast speeds ; X / Y / Z 40 / 40 / 60 m/min Spindle speeds max. 15’000 min-1 Tool connection HSK A 40 Milling cap. in St 60 max 60 cm3/min Drilling cap. In St 60 max dia. 16 mm Threading up to M12 Magazine / tool posts 24 – special on this one 40 Tool changing time abt. 0,8 sec. Time clamp-to-clamp abt. 2,2 sec. 5 axes execution NC Table tilting rotating +/- 100° Circular plates 100 mm « Rasterbohrbild » M6 x 50 mm Rotations 4th. axis 40 min-1 Rotations 5th. axis 60 min-1 Direct measuring system for 4th. And 5th. axis +/-20’’ / +/-20’’ Distance spindle nose – table surface 170 – 450 mm Max transportable weight 6 kg errors and omissions excepted-data given without obligation

Condition: excellent (used), Year of construction: 2011, Siemens 840 D, 40 tool positions, HSK 40, A-axis, direct measuring systems, hydraulics, IKZ 70 bar, chip conveyor with high ejection, paper belt filter, central lubrication system, workpiece support control, tool breakage control, tool life monitoring, fully integrated 6-axis robot with double gripper, integrated palletizing system, mineral cast bed, control cabinet cooler, Hedpfjvxrzxsx Aabonu Everything from a single source: transport, installation and commissioning can also be offered.

Condition: good (used), Year of construction: 2009, For sale: Chiron FZ 08W Magnum High Speed, a high-speed vertical CNC machining center, manufactured in 2009 and equipped with a Siemens 840D control. The machine is located in Armilla, Spain, and is in perfect working condition, ideal for precision machining and series production. Main Features: Brand / Model: Chiron FZ 08W Magnum High Speed Year of Manufacture: 2009 CNC Control: Siemens 840D (PCU 50 / NCU 572.5, 6 axes, 1 channel) Travel Distances: X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Spindle Speed: Up to 15,000 rpm Tool Holder: HSK-A 40 DIN 69893 Spindle Power: 7.2 kW (25% duty cycle) / 2.2 kW (100% duty cycle) Tool Magazine: 24 positions with automatic tool changer Tool Change Time (chip-to-chip): ~1.9 s Cooling System: Internal high-pressure cooling (up to 150 bar) High-pressure pump with dual-switchable 60 µm filter Coolant Filtration System: Automatic continuous paper filter (50 µm) 500-liter coolant tank Chip Conveyor: Chain conveyor with 100-liter chip container Automatic Loading Doors Table Size: 2x660x350 mm Maximum Table Load: 100 kg per side Rapid Traverse Speed: Up to 75 m/min (X, Y, Z) Axis Acceleration: X-axis: 1 g Y-axis: 1.5 g Z-axis: 2 g Additional Features: High-speed package (increased acceleration and faster tool changes) 0/180° Work Area Switching System with intermediate partition 3D Touch Probe Renishaw TS 27R Three-color signal light on the splash guard 230V power socket on the control panel Connection for portable handwheel ("Mini Handwheel") Integrated electrical cabinet cooling Additional Spare Parts Included: Hnjdpfjv R Hlijx Aabju This machine comes with a spare parts package from another disassembled Chiron FZ 08W, making maintenance and repairs easier. The package includes: Complete Peiseler 180° table Complete tool changer system with motor Spindle head (without motor) Operator panel keyboards Doors Various electrical components Power supply for servo amplifiers 2 servo amplifiers Chip conveyor 2 spare motors Condition & Delivery: Machine is fully operational and ready for production. Available for testing at our facility. Regular maintenance performed. Video of the machine in operation available upon request. Location & Shipping: Location: Armilla, Spain Shipping and commissioning can be arranged upon agreement. For more information, contact us via phone or email. We are available to answer any questions and provide additional technical details.

Condition: excellent (used), Year of construction: 1997, Data : x-path 300 mm y-path 250 mm Hsdpjvbfkxofx Aabonu z-path 250 mm Control Fanuc 21i- M Table clamping surface 2x (550 x 300 mm) rapid traverse 40/40/60 m/min Accessories: Chip tray & documentation (The indexing table in the picture of the machine interior is not supplied)

Condition: good (used), BAZ with integrated automation and palletizing, Fanuc control, 12 tool stations, HSK 32, 15,000 rpm, 4th axis, change table, pneumatic vices, extraction, chip conveyor, Knoll coolant system, Hjdpfxow Rru Hs Aabjnu

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,000 h, Control Unit Brand SIEMENS Model Sinumerik 840D General Data Machine weight 3600 kg Main Drive Spindle speed range 20 - 15000 Spindle motor power 2.2 kW Tool taper HSK-A 40 Number of axis 3 Movement X-Axis Movement 450 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 270 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 310 mm Hodpjwx S A Isfx Aabsnu Z-Axis Rapid Traverse 60 m/min Tools Number of station 24 Max weight 160 mm Max tool diameter 50 mm Max tool length 160 mm Additional Equipment Options: Optionally expandable to 4th and 5th axis (e.g. rotary table or swivel axis) This 3-axis CHIRON FZ 08K W vertical machining center was manufactured in 2004. It features a Siemens 840D control, a rapid traverse speed of up to 60 m/min, and a high-pressure coolant system up to 150 bar. With approximately 5,000 machine hours and a robust tool changer with 24 positions, consider the opportunity to buy this CHIRON FZ 08K W vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, X-axis: 300mm, Y-axis: 250mm, Z-axis: 250mm, rapid traverse (X/Y/Z): 40/40/60m/min, chip-to-chip time: 1.5s, clamping surface dimensions: 2x 550x300mm, max. spindle speed: 15,000/min, torque: 23Nm, tool holder: HSK-A32, number of tools: 12, tool changer: CHIRON basket changer, control: GE Fanuc Series oi-MC. An on-site inspection is possible. Hodpfxsw T Su Ss Aabonu

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 Hsdpsuhbtqofx Aabjnu - Spindle speeds : 30.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450 x 270 x 310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+115 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 20 A ROTARY AXIS - Max. bar diameter : 32 [mm] - Indexing precision : 0,001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 17 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.500 x 2.600 [mm] - Machine height : 2.300 [mm] - Machine weight : 5.100 [kg] MACHINE HOURS - Number of working hours : 20.749 [h] EQUIPMENT - CNC : Fanuc 31i-A5 - Interface : USB, PCMCIA, RJ45 - Fire extinguisher * : KRAFT&BAUER FB703 * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Coolant tank - Spindle cooling unit - Oil mist extractor : HIFI FILTER - Tool probe : Renishaw TS27R - Workpiece probe : Renishaw OMP40 - Unit for 6th face machining - Collet chuck : ORTLIEB KSF 30-50 - Tool recognition through RFID scanning : BALLUFF BIS C-650 - Tool-holders : 30

Condition: used, Year of construction: 2011, functionality: fully functional, For sale are 2 CNC milling machines Chiron FZ 08K W, year of manufacture 2011, including automated loading – robot arm cell. The machines are in very good condition, have been regularly maintained, and are ready for immediate operation. They impress with their precision, reliability, and compact design – ideal for series production. Hsdpfx Aasw Rba Sobsnu

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] Hnedpfxeuhbr Tj Aabju POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Hnedpsxd T Rzofx Aabou Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Fanuc, controller model: 21m 3x / 2x 21iM, workpiece diameter (max.): 63 mm, workpiece weight (max.): 1 kg, rotational speed (max.): 10,000 rpm, coolant supply: 1 bar, number of spindles: 1, number of slots in tool magazine: 12, Equipment: documentation/manual, rotational speed infinitely variable, 7 units CHIRON FZ08S with 4th axis Peiseler AWU P100 3 machines were overhauled by Chiron CMS in 2016 and 4 machines in 2018, Hodevx Ugwspfx Aabenu unit price approx. €30,000 each.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 346-09, This machine is equipped with a 2m LNS bar feeder, allowing it to fully automate the production of milled and turned parts directly from the bar stock. On the main spindle, there is an E162 power chuck with a bar capacity of Ø10mm. The bar feeder itself is designed for material up to Ø65mm. Additionally, the machine is fitted with a pneumatically operated two-jaw chuck to allow complete secondary machining of components on the back side. Finished parts can then be removed by an integrated gripper and placed onto the conveyor belt. The machine was retrofitted by CHIRON specifically for precious metal machining. This mainly means that seals within the machine have been reinforced, and the standard chip conveyor was replaced by a drawer unit with a fabric filter. Other features: - High-speed spindle with HSK 40 interface and high-pressure coolant (max. 40,000 rpm and up to 80 bar) - Oil cooler and chip filtration system - Kraft und Bauer fire suppression system with optical sensor - Oil extraction system - Renishaw probe - Integrated tool breakage control/measurement - Tool changer with 64 positions Location: Medical device manufacturer Hnodpfxew U Tbcj Aabou >>>> Collets and tool holders are included in the sale and are part of the listed price.

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. Hnodpfx Aowth Sbjabeu In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: as good as new (ex-display), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, number of slots in tool magazine: 49, input voltage: 400 V, type of input current: three-phase, Vertical machining center CHIRON FZ08 KS Magnum TECHNICAL CHARACTERISTICS: CNC control FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 30000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] Hsdpfx Aaeww H D Dsbenu B axis swivelling stroke: -20° / +115° [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 49 Part turnaround by robot (6th side machining): Yes RS232 Interface: Yes Total power required: 17 [kVA] Supply voltage: 400 [V] Number of hours under power: 20292 [h] Number of running hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 spindle cooling unit x1 parts catcher with conveying strip x1 coolant tank x1 unit for 6th face machining x1 collet chuck x30 tool holders type HSK40 BIG KAISER x15 collets type F37 SCHAUBLIN x1 maintenance manual x1 electrical diagrams manual x1 operator's manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: used, Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy CNC type: Fanuc 21iM 2 pallets: Yes Number of pallets: 2 Hnodpolaga Eofx Aabeu Spindle speed RPM: 15000

Condition: used, Year of construction: 2002, operating hours: 69,840 h, functionality: fully functional, machine/vehicle number: 204-77, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 250 mm, nominal power (apparent): 10 kVA, torque: 23 Nm, controller manufacturer: FANUC, controller model: 21i-M, table width: 300 mm, table length: 550 mm, table load: 100 kg, overall weight: 2,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 420 mm, number of spindles: 1, number of slots in tool magazine: 12, mount diameter: 32 mm, tool length: 160 mm, tool diameter: 63 mm, tool weight: 700 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, CHIRON Vertical CNC machining center FZ 08 W YEAR 2002 Ready for use, partly overhauled, installation and IBM can be offered. Drilling capacity D 16mm Thread cutting M12 Milling capacity 30cm/min CNC type: Fanuc 21iM 2 pallets 0/180 Spindle revolutions: 10500 12 HSK32 tools Hnsdpourb Azsfx Aabsu Coolant system with chip container Tank capacity 100 liters Pump capacity 60 liters/min at 1 bar Automatic loading door

Condition: used, Vertical machining center CHIRON FZ08KW Hedjumma Iepfx Aabjnu 2 pallet 15000 RPM HSK40A CNC Fanuc 21iM The machine is visible in our warehouse in Gussago BS. M i m u Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Condition: excellent (used), Year of construction: 2015, Various Chiron spare parts Hnjdjwr Ua Aepfx Aabeu Some as new or overhauled

Condition: good (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840 D, table length: 820 mm, overall weight: 7,700 kg, spindle speed (max.): 24,000 rpm, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 550 mm .. Y-axis travel: 320 mm .. Z-axis travel: 360 mm TABLE .. table surface (left-right): 820 mm .. workpiece load (max): 500 kg Hnsdjxn Ipgspfx Aabsu SPINDLE / HEAD .. spindle revolutions (max): 24000 /min .. tool fixture: HSK A50 AXIS DRIVES .. rapid traverse: 75000 mm/min TOOL MAGAZINE .. number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 2 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 7700 kg ATTACHMENTS .. guideway covers: yes .. central lubrication system: yes .. chip conveyor: yes .. coolant unit: yes .. closed cabin: yes .. European CE standards: yes - Shuttle table machine - Knoll (KSS) watertank FKA/350 (2011) - Highspeed plus package - - Renishaw probe, with a Chiron Lasercontrol System F1000 and with a workpiece support control - Peisseler AWU 160P rotary table - Loading and unloading robot, Fanuc LR 200iC (6-axis robot and palletizer) - Air extraction with filter Renishaw-Messtaster, mit einem Chiron Lasercontrol System F1000

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 7000 kg Hodpfxoxnd Nps Aabonu Main Drive Number of axis 3 This 3-axis CHIRON FZ 18 L was manufactured in 2004. A robust vertical machining center with a weight of 7000 kg, it operates on a 400 V working voltage and a power capacity of 30 kVA. Ideal for those seeking reliable and efficient machining capabilities. Contact us for more information about this machine. Application Types Milling

Year of construction: 1985, condition: used, Drilling capacity in ST 60 20mm Tapping capacity M16 Milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5.7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM Step change 1.12 Spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y- axis 15 m / min feed force of the X- and Y- axis 6000 N Programmable feed rate in all three axes 1 to 4000 mm/min Projection spindle to guide 300 mm Distance spindle support to table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter at full occupancy 63mm Hnjdpsb Hf I Tjfx Aabju max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. Cut to cut time approx. 3.2 sec. Total connected load approx. 15 kW (but only needs approx. 5~10 kW in operation) Machine weight approx. 3,5 to. Requires commercial compressed air connection

Condition: excellent (used), Year of construction: 2023, travel distance X-axis: 210 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D SL 4.8, overall weight: 6,000 kg, spindle speed (max.): 40,000 rpm, space requirement length: 8,500 mm, space requirement width: 2,500 mm, CONTROLS .. CNC controls SIEMENS 840D SL 4.8 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 210 mm .. Y-axis travel: 270 mm .. Z-axis travel: 360 mm Hnsdpfxsxm Rv He Aabju SPINDLE / HEAD .. spindle revolutions (max): 40000 /min .. tool fixture: HSK A40 TOOL MAGAZINE .. number of positions: 72 AUTOMATIC WORKLOAD EQUIPMENT .. workpiece manipulator: articulated robot .. number of store positions: 36 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8500 mm .. space requirements -front/back-: 2500 mm .. total weight approx.: 6000 kg ATTACHMENTS .. central lubrication system: yes .. chip conveyor: yes .. coolant unit: yes .. through spindle coolant attachment: yes .. European CE standards: yes -Siemens tool management with retooling -Fanuc Automation Robot M-10IA -Operating hours: 7,200 h - of which spindle 1 original, spindle 2: 3896 h

Year of construction: 1985, condition: used, Technical manuals and tool holders available; further technical data: Drilling capacity in ST 60 20mm Threading capacity M16 milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5,7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM step jump 1,12 spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y-axis 15 m / min Feed force of the X- and Y- axis 6000 N Programmable feed in all three axes 1 to 4000 mm/min Spindle overhang to guide 300 mm Distance between spindle and table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter with full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg Hnjdsbwn Rhepfx Aabju tool change time approx. 1 sec. cut to cut time approx. 3,2 sec. total connected load approx. 15 kW (but needs only approx. 5~10 kW in operation) Machine weight approx. 3,5 to. needs commercial compressed air connection distance measuring systems = glass measuring scales spindle conveyor with ejection height 850 mm; make: KNOLL type: 240 S-1/150; incl. documents Shifting table for