Used Chiron Fz 08 S for sale (81)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Bjdpfx Aszdkhqof Ajdh Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Bdedpfszdklpex Af Aoh Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Bdodezf Admepfx Af Ash Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Verfahrweg X-Achse: 300 mm Verfahrweg Y-Achse: 250 mm Verfahrweg Z-Achse: 250 mm Werkstückgewicht (max.):1 kg Anzahl der Werkzeugplätze：12 Pos Steuerungshersteller:Fanuc Steuerungsmodell: 21m 3x / 2x 21iM Kühlmittelzufuhr:1 bar Anzahl der Spindeln:1 Eilgang Z-Achse: 60 m/min Eilgang X-Achse: 40 m/min Eilgang Y-Achse: 40 m/min Drehzahl (max.): 10.000 U/min Werkstückdurchmesser (max.): 63 mm 4.Achse Peiseler AWU P100 die Maschinen wurden 2016 durch Chiron CMS überholt Ausstattung: Dokumentation/Handbuch, Drehzahl stufenlos einstellbar Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Bdodpfxsywmzio Af Aeh Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden.

Condition: repair required (used), Year of construction: 2008, operating hours: 25,000 h, functionality: not functional, machine/vehicle number: 191-65, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 350 mm, overall weight: 8,700 kg, spindle speed (max.): 20,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 2008 CHIRON FZ 15KS High Speed Plus 5-axis vertical machining center with Heidenhain CNC control. Machine weight approximately 8,700 kg. Chip conveyor included. The spindle is defective and has been removed. The spindle and available related components are stored in wooden crate and are included in sale. The spindle requires repair,rebuilding. Bodsz Hmb Aepfx Af Aedh The machine is sold as-is and where-is. Inspection is available in Ankara,TURKEY. Asking price: EUR 30.500, negotiable. EXW Ankara.

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Bdsdpfeyxn Hcex Af Ajh

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450 x 270 x 310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+115 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 20 A ROTARY AXIS - Max. bar diameter : 32 [mm] - Indexing precision : 0,001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 17 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.500 x 2.600 [mm] - Machine height : 2.300 [mm] - Machine weight : 5.100 [kg] MACHINE HOURS - Number of working hours : 20.749 [h] EQUIPMENT Bjdpfjuhbtqex Af Ajdh - CNC : Fanuc 31i-A5 - Interface : USB, PCMCIA, RJ45 - Fire extinguisher * : KRAFT&BAUER FB703 * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Coolant tank - Spindle cooling unit - Oil mist extractor : HIFI FILTER - Tool probe : Renishaw TS27R - Workpiece probe : Renishaw OMP40 - Unit for 6th face machining - Collet chuck : ORTLIEB KSF 30-50 - Tool recognition through RFID scanning : BALLUFF BIS C-650 - Tool-holders : 30

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] Bdsdpjuhbr Tsfx Af Ash POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: used, Year of construction: 2001, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 47 kVA, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,700 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Chiron FZ 15K S machine, manufactured in 2001. CNC control: Fanuc Series 18i 2-axis rotary table (A and C axes) 48-position tool changer Chip conveyor Coolant unit X-axis travel / X-axis stroke: 550 mm Bdsdozyyqyopfx Af Aoh Y-axis travel / Y-axis stroke: 400 mm Z-axis travel / Z-axis stroke: 360 mm C-axis / C-axis: 360° A-axis / A-axis: +-100° Spindle taper: HSK A63 Weight: approximately 8700 kg Spindle speed: 20-12000 rpm If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Bdedpfezkkgmex Af Ajh

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline # Chip conveyor: Spring Knoll Bsdpfx Afjxxivce Asdh # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine # Tool magazine presence sensor (BERU)

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Bedpfxsrgqu Ho Af Asdh Machine can be inspected any time under power

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg Bedpfxoxwmvko Af Aedh # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle Bdjdpfx Afjxw Uple Aeh # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: excellent (used), Year of construction: 2000, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, Chiron FZ08W Magnum vertical machining center Bdsdpjzznm Eefx Af Ash Sinumerik 840D control Max spindle speed: 15,000 rpm X = 300 mm Y = 250 mm Z = 250 mm 2 x 4th axis Peiseler RT 100 Tool holder: HSK 32 ATC: 12 positions The machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I am offering a 3-month start-up warranty.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll Bodpfx Asxxi Rmef Aedh - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA - Fire protection: Kraft & Bauer - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Bjdsxd T Rzspfx Af Aodh Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Bsdpfx Aeyt I Uhjf Aodh Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: Bodpfx Afsz Dbyhj Ajdh - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Compressed air: min. 5.5 bar, approx. 510 Nl/min Coolant connection DN40 Dimensions / Installation: Bsdpozv Tlvsfx Af Aedh Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system)

Condition: ready for operation (used), Year of construction: 2005, A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible. Bjdjwxfa Hopfx Af Aodh

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Bdodpfx Asyq Nyyof Aoh Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank Bdsdpfx Afox Iiw Ij Ash x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Bdjdey R Dqhspfx Af Ajh

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM machining center, year of manufacture 1997, are for sale: 9 pcs. tool arms 1 pc. spindle 1 pc. Siemens spindle motor Bedpfx Afsxdhp Eo Aodh