Machining Center - Universal

HERMLE C 22 U

Condition: used, Year of construction: 2016, operating hours: 76,605 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, input voltage: 400 V, controller manufacturer: Siemens 840d sl Operate, number of spindles: 1, rotary table diameter: 320 mm, spindle nose: HSK-A 63, tool diameter: 125 mm, tool length: 250 mm, tool weight: 8,000 g, operating hours of spindle: 18,160 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C22U 5-Axis Machining Centre Year of manufacture: 2016 Hfsdpfx Adjxxg Ezsweb Machine on-time: 76,605 h, Spindle on-time: 18,160 h Siemens 840D sl Operate 55 tool positions, HSK-A63 NC swivel rotary table SRT320 mm C-axis with worm drive A-axis with single-side drive Standard coolant system, without high-pressure coolant Rear chip conveyor External air blast Spindle center air blast Chip flushing gun Oil mist extractor including afterfilter Automatic cabin door Manual cabin roof Siemens electronic thermal compensation Heidenhain touch probe The machine is fully operational and calibrated. Machine can be inspected and tested under power at any time.

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 distance spindle center to table hor.: 130 - 1.730 mm distance spindle center to table vert.: 230 - 1.830 mm Hjdpfjx H Tt Dox Adwofb distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Pallet Changer 2 pos. - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Hermle C 22 U with RS05 Automation Year of manufacture: 2022 Control: Heidenhain TNC 640 X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Hjdsp Eci Tspfx Adwofb Table size: ⌀ 800 mm Spindle: HSK-A 63 Spindle speed: 18,000 rpm Tool changer: 55+ ZM216 loaded, 271 tool positions Operating hours: approx. 11,000 h Spindle hours: approx. 7,500 h

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Hfodpfx Asxpil Sjdwsb Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Hjdow D Aynspfx Adwefb

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Hfjdpfx Adovtmhpowob Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: excellent (used), Year of construction: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Z travel: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 kg NC rotary table with direct drive Positioning: 0.001° Max. Max. speed of the rotary indexing table: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 KW (25%) / 28 KW (100%) Spindle torque: 1210 NM / 680 NM Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 places Max. Tool diameter: 325 mm Max. Tool length: 800 mm Max. Tool weight: 35 kg Hsdpfx Adjvgxfyjwefb Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in the tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 High speed and high accuracy option on Fanuc. Hfedpfx Aovcfi Dedwsb The Machine can be inspected under power.

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Hedpfxoxp Hmaj Adwefb Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain, controller model: TNC640, Control : Heindenhain TNC 640 Technology : Direct drive Speed : 12,000 rpm Power : 30 kW Torque : 176 Nm Taper : SK 40 Toolchanger : 40 stations Working area Movement X : 1,000 mm Movement Y : 600 mm Movement Z : 650 mm Fixed Table (X/Y) : 1,100 x 600 mm Load capacity : 1,200 kg Hodpotpm Stjfx Adwjfb Others Rapid traverse (X/Y/Z) : 36/36/32 m/min