Material receiver

Hess

Condition: used, pneumatically controlled, 0 - 15 bar Press dimensions: 2000 x 2500 mm 4 vertical cylinders Chsdpfxjz H Afdj Af Aec 2 horizontal cylinders Mobile, can be used on both sides Location: Nattheim

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm Chsdpfx Aedx Ryyof Aoc coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Year of construction: 2013, condition: used, Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Cjdpfx Afjy Spvlo Aehc Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. Chodpfx Afewqr R Aj Asc loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Year of construction: 2013, condition: used, Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 motorized translating roller conveyor * 1 motorized roller conveyor for panel stack unloading Technical features: * Type: KR210-2 * Number of axles: 6 * Admissible nominal load: 210 Kg Chsdpfx Aer Am Sqof Ajc * Machine weight: 1267 kg * Sound level: 75dB * Installed power: 25.8 KW * Panel dimensions - Min\max length: 300\3000 mm * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: 90 kg

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- Price of the above mentioned machine, upon request! ----- Chodpfx Aexnqw Tef Asc For your information: One image shows homemade counterprofiles. This image is for illustrative purposes only. The counterprofiles are not included with this frame press. ----- (technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine Chsdpfxsv D Rg Do Af Aoc housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Cjdps Ea U Hofx Af Aohc Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Available with a mechanical control valve or optionally with an electric valve (24V or 230V). Many other band widths and feed lengths are available.

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Cedpfx Ajt Tqy Eof Aehc Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!) Csdpfx Aex Dng Def Aehc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Chsdeyu Urispfx Af Asc Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: excellent (used), Year of construction: 2000, HESS rack trolley, lifting and extending platform, year of manufacture 2000 Chedpfx Aexmu Elsf Ajc

Condition: ready for operation (used), Year of construction: 1988, machine/vehicle number: 100.613, functionality: fully functional, Machine available for immediate delivery. Forklift available for loading. 2 cylinders per pressing unit. Cylinder stroke approximately 110 mm. Csdpjy Tly Aefx Af Aohc Maximum pressing force approximately 1000 kp. Working width 250 - 2500 mm. Working height 250 - 1250 mm. Working depth max. 600 mm. Electric height adjustment of the central vertical unit with scale. Manual adjustment of the central horizontal unit in 50 mm increments with pneumatic clamping. Separate control of the vertical and horizontal pressing units via hand control valve. Pressure force regulation 4 - 10 bar.

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used upright frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and upright depths! The scope of delivery includes: 1x Upright frame, used Material color: completely galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm (freely selectable by you) Other heights and depths can be manufactured upon request. Cjdpfx Ajdf S Eyjf Aohc Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions. - Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: used, Year of construction: 2000, table width: 2,700 mm, table length: 3,300 mm, total length: 3,800 mm, total width: 1,000 mm, total height: 2,700 mm, overall weight: 2,000 kg, No. 04544 Perforated plate press Hess JULIA Used, year of construction 2000 Dimensions of the perforated plate 3300 x 2700 mm LW 4 manual hydraulic cylinders (2 in need of repair) 12 pneumatic cylinders (2 magnetic and with angle adjustment) Transport dimensions approx. 3800 x 1000 x 2700 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse Cjdpfx Ajy E N Izof Ajhc