Plate Bending Machine - 3 Rolls

HESSE by ISITAN RM 1550 x 90

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Itsdsv S U Izopfx An Djf Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: new, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop - documentation - 400V Itedpfx Anjhc Uvmj Dof

Condition: good (used), Year of construction: 2002, machine/vehicle number: V020113, operating hours: 43,000 h, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Iodpfouwktnox An Detf Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz Iedocdrmmspfx An Djtf - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm Ijdpfjvx Uvxex An Detf total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Itjdorfx Utopfx An Djf Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Height horizontal min. 0,6m, max. 1,2m height tilted min. 0,40m, max. 1,0m speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 hand and foot remote control with speed indicator very robust Itsdpfx Anjhua Dqo Djf

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. Iedjrq D Niopfx An Dstf The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 1000x40, functionality: fully functional, pressing force: 40 t, total length: 2,300 mm, total width: 1,950 mm, overall weight: 1,850 kg, working width: 1,000 mm, working range: 1,000 mm, Equipment: safety light barrier, Used Like New Ermaksan 1metre x 40ton 3axis cnc downstroke pressbrake for sale Complete with Cybelec Cybtouch 12 Control Year 2020 Specifications Itodpfjvy Ewiex An Dsf Max. bending length 1metre /1000 mm Distance between column 800 mm Max. pressing force 40 Ton Beam stroke 100 mm Table Width 90 mm Load more specifications Dimensions (Estimate) Length 2300 mm Width 1950 mm Height 1860 mm Weight 1850 kg Complete with lower multi v tooling and segmented upper tooling

Condition: new, - Capacity 700 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop - Documentation - 400V Ijdpfx Asihv Hpon Dotf