4 column press 400 tons PH4C
HIDRALMAC Viersäulenpresse 400T

Name: HIDRALMAC Viersäulenpresse 400T
Brand: HIDRALMAC
Availability: InStock

Year of construction

2016

Condition

Used

Location

Gelsenkirchen Germany

4 column press 400 tons PH4C HIDRALMAC Viersäulenpresse 400T

Show map

Machine data

Machine type:: 4 column press 400 tons PH4C

Manufacturer:: HIDRALMAC

Model:: Viersäulenpresse 400T

Year of construction:: 2016

Condition:: like new (used)

Price & Location

Location:: Hertener Strasse 108, 45892 Gelsenkirchen, Deutschland

Call

Details about the offer

Listing ID:: A7725563

Reference number:: MARO-1277

Update:: 27.03.2025

Description

passage width 2500 mm
stroke 900 mm
Total power requirement 62 kW
machine weight approx. 27,5 t
dimensions L x W x H approx. 3950 x 2200 x 4850 mm
retraction force 40 t
Main cylinder 2 pieces
column diameter 220 mm
installation height 1300 mm
table size 2500 x 1600 mm
ram size 3100 x 16000 mm
table height above floor approx. 900 mm
forward speed 200 mm/sec
return speed 200 mm/sec
working speed 5 - 15 mm/sec
oil tank 1500 l
oil quantity 1200 l
pressure control adjustable from up to 50 - 400 t
thermoforming cushion 1400 x 800 mm
thermoforming unit capacity 30 - 60 t
deep drawing cushion stroke 250 mm
thermoforming cushion speed 5 - 80 mm/sec

robust machine body with solid welded construction
low maintenance and reliable
piston rod with induction hardening and chrome plating
T-slots according to customer requirements, if not specified
22mm according to DIN
CE certificate
manufactured according to EU standards
operating instructions, technical documentation, documentation in German language
engineering steel LCG ASTM A36
T-slots in table and ram according to DIN 650-22
Travel control adjustable via monitor
Light sensors front + rear: Sick 1300mm
Hydraulic components Bosch Rexroth
Monitor Siemens 12 inch
Electrical control box for wall mounting
Interior of the press illuminated with LEDs
Nedpfx Ajin Et Nsa Djwb
Hydraulic block monitored by safety PLC
Energy control system: Reduction of the
idle consumption of the pump to approx. 2 kw
Remote control for remote maintenance
Two-hand operation on movable stand
Further information:
Pressure build-up up to 400 T within max. 4 seconds after closing the die.
Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Operation of the press can be manual, semi-automatic or fully automatic

Seller

Registered since: 2018

90 listings online

Call

Send inquiry

Telephone & Fax

+49 209 9... show

These listings may also fit your interest.

Listing

Vertical machining center FANUC Robodrill α-T21iFa

Zuchwil

6,964 km

Vertical machining center
FANUCRobodrill α-T21iFa

Call

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): Njdpfxoxflxaj Aa Djwb CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

See details

Listing

Straightening press Stierli-Bieger 2000 RP - 200 to Biege- und Richtpresse

Sursee

6,922 km

Straightening press
Stierli-Bieger2000 RP - 200 to Biege- und Richtpresse

Call

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. Nwedsufhzvepfx Aa Deb This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)

See details

Listing

Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 50

Schorndorf

6,816 km

Hot-Chamber Diecasting Machine - Vertic.
FRECHDAW 50

Call

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm Njdpfx Asfrvzvja Dswb height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

See details

Listing

Austria

6,410 km

Edge banding machine
BRANDTKD 84

Call

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar Nwodpsc Tmygjfx Aa Dob machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

See details

Listing

Jasło

5,964 km

CNC lathe
DoosanLynx 2100 LYA

Call

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 FANUC touch control Specification: Max spindle speed: 6000 rpm Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor - Driven tool holders: 4 pcs (2/2) Njdpfx Ajx Id D Aea Dowb - Standard tool holders: 6 pcs Operating hours: 3177 hours

See details

Listing

Schömberg

6,872 km

Machining center
HERMLEC30 U

Call

Condition: good (used), Year of construction: 2004, operating hours: 1,09,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Nwedpfx Aajxcp Slj Dsb Very well-maintained condition.

See details

Listing

Turning Automatic Lathe - Longitudinal CITIZEN A32-VIIPL

Germany

6,760 km

Turning Automatic Lathe - Longitudinal
CITIZENA32-VIIPL

Call

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW Nwodpfx Aaew Ed Tfe Dob weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

See details

Listing

Niederlangen

6,984 km

Welding Robot
KUKAKR20 R3100

Call

Year of construction: 2021, condition: used, KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20kg payload External axis module for coupled rotary axis, mathematically coupled Kuka ArcTech Basic Package + Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module During oscillation, the voltage is measured by the power source and thus, in the event of component distortion, the welding path is shifted. * Function only for fillet welds Includes Lorch S5 SpeedPulse XT welding machine Includes automatic torch cleaning station Nwedpfx Aaswgn Dwj Dsb *Cutting device *Milling cutter *Welding separation spray

See details

Listing

Iserlohn

6,958 km

CNC 4th axis
NIKKENCNC -200

€2,250

ONO plus VAT

Call

Listing

Portal milling machine F. Zimmermann FZ 33 compact

Baienfurt

6,805 km

Portal milling machine
F. ZimmermannFZ 33 compact

Call

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Njdpfx Aowywcioa Dewb Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

See details

Advertise here