Portal milling machine

F. Zimmermann FZ 33 compact

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Hjdpfx Asy En Dnslweu Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Width:800mm Hjdpsy Uvhyjfx Alwou Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2016, operating hours: 390 h, functionality: fully functional, type of input current: three-phase, overall weight: 827 kg, Carrier water chiller Model: 30RBS-140B0181-ME, year 2016, R410A. 135 kW (116,100 frigories), cooling only, maximum consumption: 61 kW. Dimensions: 2258x2050x1330 mm, plate heat exchanger, weight: 827 kg. Machines fully tested in our warehouse with gas, inspection possible. Reference: 1137. Hodpfjyfwuzex Alwsu

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Hsdpfx Alev Sa I Teweu In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t Hjdpfjd Iin Hox Alwsu dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,20,01,400 mm, travel distance Z-axis: 1,80,01,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Hodpfx Alozb H Tfowou Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Hedpfx Alju Tkcljwju Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Hodpfx Aleh Nypfeweu

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. Hodpfxsg Rgt Ue Alwou 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe Hjdpfozqv A Tjx Alweu