Vise

HILMA NC 100

Condition: used, thickness of jaw / mm max. clamping width / mm weight / kg length in total / mm Hjdpfxsyr Sm Ss Abtet Roemheld Hilma NC 100 CNC machine vice

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Point angle: 90 - 140° Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Hodpjx Ea Nmsfx Abtot Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg +++++ Please note: Hedpfxefym Hus Abtjt The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Hjdsi Amnpopfx Abtet Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Hodjitylgepfx Abtot Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Condition: used, machine/vehicle number: 102 039 1024 07265, cutting area at 90° round: 245 mm cutting area at 90° flat: 220 x 240 mm cutting area in mitre at 45°: 150 mm saw blade measures: 400 x 31 x 2 mm stroke speeds: 55 - 155 /min electrical connection: 380 V, 1,1 kW space needed: 1200 x 650 x 1250 mm weight: 340 kg Hjdpocd Tmyefx Abtet

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice Hsdpjxab Hcjfx Abtet - coolant device

Condition: used, Hydraulic band saw (Made in Croatia), type BS 320 Year of manufacture approx. 1980 Cutting range, round: Ø 320 mm Cutting range, square: 280 x 280 mm Saw blade: 550 x 45 x 2.25 mm Material feed height: 680 mm Saw speed: 42 - 55 - 85 - 110 strokes/min Motor power: 1.8 and 2.4 kW, pole-changing Power supply: 400 Volt, Hz - Miter adjustment up to 45° - Saw motor with 2 speeds and 2 V-belt stages Hedolqadhspfx Abtot - Hydraulic saw arm lowering - Hydraulic cutting pressure adjustment via throttle valve - Coolant system in the machine base Space requirement, band saw L x W x H: 1900 x 1350 x 1500 mm Width without stop: 800 mm Weight: approx. 750 kg Good condition

Condition: used, Year of construction: 1982, Technical details: cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Workpiece holder via fixed jaw and clamping jaw, with hand crank Coolant device in the base Hedsu Nilaspfx Abtjt limit stop *

Condition: good (used), Internal article no.: 26031 Universal milling machine Deckel FP1 Infinitely variable feed Hodpjyqx S Ejfx Abtjt + Various SK40 tool holders + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The servomotor has been overhauled! Travel: X300 / Y160 / Z340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min The machine is fully functional and can be inspected under power, by appointment, in a heated storage area of over 500 m².