Balancing Machine

HOFMANN EO-Re / MC 10

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. Iodpfx Adsvxipgjwoal X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: new, Year of construction: 2024, functionality: fully functional, Drive spindle Iasdpfx Adeup Slbswol Speed: 3,000 rpm Power: 11 kW Torque: 320 Nm Chuck diameter: 260 mm Spindle bore: 65 mm Spindle nose: A2-6" Working area Center distance: 1,500 mm Center height: 290 mm Diameter over bed: 570 mm Diameter over slide: 510 mm Tool system Turret: PARAT 4-station turret head RD 3 Tailstock Technology: Manual Center: MK-4 (flying) Equipment Chip management: Chip tray Coolant supply: Coolant pump 7 bar

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Iedpfx Aot Dmmvjdwjal Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: new, workpiece weight (max.): 30 kg, rotor diameter: 700 mm, The BALANCING MACHINE 9A713 is a universal horizontal-axis balancing machine designed for light rotors up to 30 kg in various configurations. Iaedpfx Aotu Ukajdwol This series incorporates innovative technical solutions, ensuring that balancing is straightforward and accessible. With high performance and functionality, the 9A713 is popular in manufacturing across multiple industries. Originally designed for small series and individual production, its versatility and productivity have also made it a favorite in various repair shops. HIGHLIGHTS • High balancing accuracy 0,4 gmm/kg = 0,4 µm • Advanced Rollers: Specially designed rollers with advanced grinding technology mounted on precision bearings. • Bearing Design Options: Hard-bearing design suitable for small rotors, with optional soft bearing support available. • Belt Drive System: High degree of belt tensioning repeatability with a micro-tuning function for precise belt tension adjustment. • Quick Changeovers: Easy access to support rollers for quick rotor reinstallation and rapid replacement of roller units with prism units, significantly reducing changeover time. • Versatile Rotor Balancing: Capable of balancing rotors with small distances between bearing journals, limited only by the drive belt width. • Variable Speed Control: Frequency inverter asynchronous electric drive with a powerful motor for infinitely variable speed control and smooth acceleration/deceleration. • Height-Adjustable Supports: Adjustable supports to accommodate different bearing journal diameters, aiding in centering the workpiece. • Easy Installation: Requires no special foundation and can be installed on a standard concrete floor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced rotors 0.3 - 30 kg (60 kg) Maximum rotor diameter (above the bedding) 700 mm Distance between centres of rotor supports 10 – 700 mm Support type Rollers + Prisms Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 2000 rpm Electric motor power 0.75 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: excellent (used), Grinding range 650 x 300 x 550 mm Table size 650 x 250 mm Automatic dresser Iajdpfx Adjrvhirowsl MARCELS MASCHINEN CH

Condition: refurbished (used), Gap Bed Between centers: 100” Iaodpfx Aowga Eyjdwjl Swing over bed: 22″ Spindle speeds: 18 – 1400RPM Spindle bore: 3 1/2″ Diameter Chuck mounting: D1 – 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady

Year of construction: 2021, condition: excellent (used), power: 10 kW (13.60 HP), input voltage: 415 V, belt width: 407 mm, product height (max.): 85 mm, Lomax TD 407 Double Drum Spiral Freezer – To Be Converted into 2 x Compact Single-Drum Spiral Freezers We are offering a Lomax TD 407 spiral freezer, originally supplied as a double-drum configuration, which will be professionally split into two independent single-drum compact spiral freezers. Each machine will be supplied as a stand-alone compact spiral freezer, ideal for food producers looking for efficient freezing capacity with a smaller footprint. Conversion scope includes: Separation of the existing double-drum system into 2 individual single-drum spirals Iaedpfx Adstzmk Newol Independent drum, belt and tensioning system per machine Separate infeed and outfeed per unit Machines configured to operate independently Suitable for installation in existing production environments This conversion provides a cost-effective solution for customers requiring compact spiral freezing without investing in a brand-new system. 📍 Machine currently located in the UK 📦 Available as two separate machines following conversion 📩 Further technical details, layouts and pricing available on request Year of manufacture 2024 304 Stainless steal mesh belt Product gap 85m Tier pitch 140mm 1.62m Drum 24 Tiers on up drum 24 Tiers on down drum Belt Width 407mm Effective Belt Width 337mm

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series Models: S-3560, S-3511, S-3513, S-3516 -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation. -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width. -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Isdpshwb Utsfx Adwoal Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Iedpehikdwefx Adweal Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Iasdpfxjmdn Dxo Adwol