5
workpiece weight:3000 kg
workpiece length:5250 mm
diameter:30-250 mm
speeds::300 U/min
wave pickup:30-250 mm
B3ovgmeyiz
balancing radius:1150 mm
5
workpiece weight 7,5-35 kg
workpiece length 300 - 750 mm
W0dw89d2
diameter 190 mm
balancing speed variable 400 U/min
Control
rated current 16 A
weight of the machine ca. 2 t
dimensions of the machine ca. 2,10 x 1,50 x 2,10 m
8
workpiece weight max. 3 kg
workpiece length 40 - 500 mm
diameter 80 mm
T2bhdqy0
turning speeds max. 3000 U/min
connected load frequency 230V 50Hz
total power requirement 0,5 kW
weight of the machine ca. 220 kg
dimensions of the machine ca. 1 x 1,5 x 2 m
We offer a small, modern balancing machine for motor anchors of the type TIRA K
3B. This machine, built in 2005, is in a very good condition and ready for
demonstration and can be inspected under power.
It can be balanced with the system ...
4
max. workpiece diameter 1.000 mm
speed of balancing 530 U/min
Motor power 2,2 kw
B9dzmsddnv
Vertical Balancing Machine | SCHENCK - 130 CBAE
The machine is in a well-maintained condition and
can be inspected at any time under power.
Please refer to further technical details in the attachement of the offer.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: 130CBAE | 130-CBAE
5
balancing body max.: kg
balancing body diameter w/o machining unit: mm
balancing body diameter with machining unit: mnm
range of revolution per miute: 180 U/min
voltage: 230 / 50 V/Hz
machine weight approx.: 150 kg
dimension machine xH: 1,2 x 0,8 x 1,3 m
Cfkvykpu
Balancing Machine for car wheels
PKW Reifenauswuchtmaschine
Felgenbreite: 1,5 - 20"
FelgenØ max. 12 - 24"
Rad Ø max. 900mm
Mittenloch Ø Felge max. 130mm / min. 45mm
Messdrehzahl 180 U/min.
Radgewicht max. 65kg
1
workpiece weight 100 kg
B3pvp7spff
workpiece length 1000 mm
diameter 500 mm
centre height 280 mm
total power requirement 2,5 kW
weight of the machine ca. 1 t
dimensions of the machine ca. 1,6x 1x1,6 m
6
workpiece weight 7.000 kg
external diameter 2.000 mm
Bzxcjrz
15
Offered for sale is the pictured balancing machine from the manufacturer Schenck.
- 9t balancing weight
- 9m length
- Belt drive (cardan drive available, control prepared for cardan drive)
- measuring device Cab 690
- n=5000rpm
P2obh
- with boring mill
- support stand 9,5 + m long
- with extensions
- with frequency conversion
- with long drill with twist
- with printer
- machine bed at ground level
- poured with dowry, to be removed immediately (not concreted!)
The machine is functional and un...
4
workpiece weight 200 kg
workpiece length 400 mm
diameter 800 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. 950x580x570 m
O3jvp
1
Balancing machine suitable for fully automatic balancing of brake discs with material removal by milling.
Overall dimensions:- Plant width: 3750 mm.
- Plant depth: 3500 mm.
- Plant height: 2150 mm.
Ccirliz2xp
5
Balancing machine, Manufacturer Schenck, Type HS20 / MAK18DV, Year of construction 2013, Base frame, Clamping device, Drilling unit, Linear motion control, Schenck control type CAB920, Control cabinet, Safety housing, Mobile suction unit Ringler type RI131, Accessories
Beypayncko
1
Workpiece weight 100/150 Kg
Workpiece diameter 300/735 mm
Workpiece length 600 mm
Rotational speed 310-960
Shaft diameter 70 mm
center height 370 mm
Power 2 kW
Weight 0,8 ton
F32pcjj
1
Compact balancer with horizontal axis of rotation with belt drive of rotor with load capacity up to 50 kg. Due to its compact design, the machine takes up relatively little space and does not require foundations, so it can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs which convert unbalance into a convenient correction method, e.g. into drilling or milling pa...
9
Offered for sale is the pictured balancing machine from the manufacturer Schenck.
- 7t balancing weight
- 7m length
- with cardan and belt drive
- with drilling unit
- with printer
- additional pair of rollers for diameters over 200mm
- measuring device Cab 96
- enabled for envelope balancing
- n=5000rpm
- frequency controlled
The device is functional and under power.
A forklift truck for loading is available.
The items can be picked up on weekdays and Saturdays from 9 to 16 clock in 41468 ...
7
Balancing machine
Capacity: 30 kg
Max rotor diameter: 600 mm
Balancing speed: 900 rpm
Biqqul9vmy
Power: 1.5 kW
5
Cutters balancing machine ED15 Kondomatic
B2bgmflgph
3
Serial no .: A4141.01-03422, inventory no .: 20-1100111-0, integr. into the automation, control Hofmann, with extraction ringler and cooling unit.
Cdu88f8q
Dimensions (HxWxD): 2.66 x 2.80 x 2.60 (m), number of parts: 3 pieces.
Machine characteristics:
Workpiece: gear 2, rotor weight with symmetrical load: 652, 5 g,
Clamping diameter: 19.5 g6 mm, measuring speed: 850 min, pneumatic connection: 5 bar.
Electrical equipment:
Connected load: kVA, mains frequency: 50 Hz.
Metrological equipment:
Measur...
3
Force measuring dynamic balancing machine make Dr. REUTLINGER type HK 12 LB
Machine # 5.212.070 Year of manufacture 1985
Technical data:
Workpiece weight 1-100 kg
B7veene9he
GD 2 and 2 2,3 x 10 high 6
center height 340 mm
horizontal adjustment of the fixture 800 mm
outer dimensions approx. 1800 x 1000 x 1450 mm
with
- measuring device K 2700
- computer MC 100 with screen
- retractable cover
little used, in good condition
1
Compact balancer with vertical spinning axis and load capacity up to 50 kg. Thanks to its compact design, the machine takes up relatively little space and does not require foundations, so it can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs, which convert the unbalance into a convenient correction method, e.g. into drilling or milling parameters.
Vertical axis...
3
Machine type: Balancing machine
P90dn
Manufacturer Schenck RoTec GmbH
Type 421 RBTU
year of manufacture 2017
Condition used
Fert. No. 1RFTU0260; Supply voltage 400V, +10%/-10%, 3AC; Rated frequency 50/60Hz; Full load current 15A; Short circuit breaking capacity: 100kA; On-site fuse 20A; Circuit diagram S906711; Control voltage (Tension de Control) 24V/DC / with transformer.
Inspection at any time by appointment!
Pickup immediately possible!
For further inquiries we are at your disposal.
3
Center height 400 mm
Workpiece diameter Max. 720 mm
Workpiece length Max. 600 mm
Workpiece weight 0.5-50 Kg
Balancing speeds: From-To 600-1200 rpm.
Bxwyid7scf
Motor 400 Volt
Power approx. 0.75 KW
Machine dimensions: width / depth / height 1700x500x1500 mm
Weight of the machine approx. 1500 Kg
11
Offered here is a balancing machine from the company Trebel.
The machine has a solid steel protective hood.
For rebuilding, because the control cabinet is missing!
Technical data:
Manufacturer: Trebel
Type: FC4c-xn
B2mhk8njls
Year of manufacture: 1970/74
Normal weight range up to 400kg
Max. permissible load per block: 200kg
3
Tyre balancing machine make HAWEKA type BALCO 9460
Make # 0507.602.8007.13
technical data:
max. wheel diameter 950 mm
max. wheel width 530 mm
max. wheel weight 70 kg
rim width 76 - 510 / 3 - 20 mm/"
Gx8o9ce
measuring time >6 sec.
Measuring speed
1
Compact balancer with horizontal rotating axis and belt drive of up to 30 kg load capacity. Due to its compact design, the machine takes up relatively little space and does not require foundations, thus can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 8.5" with dedicated software equipped with workshop programs which convert unbalance into a convenient correction method, e.g. into drilling or milling parameters.
Belt d...
8
Hang 115 G 3P Punching and eyeletting machine of the back eyelet
Producer: Hang Germany
Very good condition, after the review.
Yiiwxj3
The machine is used for crimping eyelets on the back of a binder (Griffloch)
Separate punching and eyelet tools punch holes and align eyelets with a single stroke in a fast, cam-driven sequence of movements
Easy to replace, automatic eyelet guide
Weight 340 kg
380V power supply
5
• Carrying out folding operations of sheets with a maximum thickness of 1.5 mm and a maximum size of 8 m
• year of manufacture 2009
• weight 13000 kg
• hydraulic pressure 180 bar
• maximum thickness of the raw material 1.5mm
The machine is equipped as standard with safety equipment to prevent accidents during use:
• emergency stop switch
• emergency stop cable along the machine
The machine is equipped as standard with a software system that has the following characteristics:
• manual work mode...
2
Perforating device
Creasing device
Mxd0fw
15
We manufacture industrial paint plants. We are happy to be a solution partner in case of need.
- Electrostatic Powder Coating Ovens (Box Type / U Type / Conveyor, etc.)
- Powder / Wet Paint Booths
- Washing and Drying Lines
- 900 Degree Enamel Ovens
-Powder Coating Guns
-Powder Coating Booths
-Powder Coating Booth Filters
-Electrostatic Powder Coating
- Tailor-made Special Production Facilities
Ccsah3kzl0
Note: Our furnaces are manufactured according to your demands, in desired dimensions, wit...
CAM-300 Automatic Sanitary napkin , surgical mask, paper napkin, napkin, paper, Sanitary Napkin, Mask, Towel, Wet Wipes , wet towel packing line Sanitary Napkin Packing Machine
Main Features
☆ Fully servo driven,Servo motor management by electronic CAM
☆ Modular structure design，Small floor area
☆ Force restrict protection, stable running
☆ Suitable for different direction packing
Main component configuration
★ Motion control system：MITSUBISHI/SIEMENS
★ pneumatic：SMC
★ Guide rail, screw rod ： ...
ALUMINUM AND PVC DOUBLE HEAD CUTTING MACHINE
OUR Q450 - Q500 - Q550 SAW MACHINES ARE AVAILABLE.
It complies with CE Standards.
2 Years Garantueed.
Saw movement with hydro-pneumatic hydrocheck control.
Cutting Accuracy +/- 0.1mm
*90 and *45 can be automatically adjusted to two inward angles.
*Automatic slicing at 90 angles.
10' color touch screen.
Possibility to connect remotely and provide technical support.
Servo motor motion system.
180mm saw exit distance and 80mm x2 profile cutting.
Hydroch...
7
SEMIAUTOMATIC MACHINE FOR FIXING RADO AND FINGER HOLE EYELETS ON FILES OM 12/C
Producer: Industria Meccanica Lombarda srl Italy
Qsfnz
Very good condition, the machine is ready for production.
IML OM12 / C – semi-automatic machine for die cutting and crimping rado eyelets and ridge eyelets
Max format 750x390mm
Cardboard thickness 0.5-3mm
Weight 210 kg
Pneumatic power supply + 220V.
6
ROLLFORMING MACHINE
PRODUCING SQUARE PROFILES
WITH 5 TONES OF TOOLS
MADE IN ITALY
Bhxi3quk0n
8
Working paths
X-axis (horizontal) 2,500 mm
Y-axis (horizontal) 1.000 mm
Z-axis (vertical) 1,000 mm
Working spindles
Drive power spindle (S1) 54 kW (SK-50)
Torque spindle (S1) 200 Nm (SK-50)
Max. Spindle speed 12.500 rpm (SK-50)
Work table
Table dimensions, W x L, 3,000 x 1,000 mm
Table load, max. 4,000 kg
B-axis
B-axis swivel range ± 120
Speed, max. 100 rpm
Swivel torque, max. 2,282 Nm
Clamping torque, max. 4,000 Nm
Rotary table (C-axis)
Table diameter, Ø 1,000 mm
Table load, max. 2,000 kg
S...
7
ORION AND SN
Automatic single-headed welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
7gejx2o
- Pneumatic work
- Seamless and standard welding
- One-button welding mode changeover
- Welding between 30˚ and 180˚
- Automatic process from start to finish
- Welding time control and digital temperature control
- Temperature control from 0˚ to 350˚ with electronic thermostat
- PLC control system
STANDARD EQUIPMEN...
7
L Bar Wrap Shrink Packaging Machine BSF-5540
Brand new device.
Description:
The main advantages of the cover shrink wrapping machines are, among others simultaneous welding and shrinking, small overall dimensions and easy movement. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They have the option of regulating the welding time and temperature of the heaters, as well as the possibility of shrinking PVC foil and polyolefin foil.
Technical parameters:
Qq...
11
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
STANDARD EQUIPMENT:
⦁ Right and lewegp pr...
5
Mini Pak’r Air Cushion Machine
The machine creates air-inflated fillings from the foil sleeve.
230V power supply
Weight about 6 kg.
Trw7aupr
4
GALAXY - III (PVC)
Milling copier with triple socket for drill bits (handle) and water drainage channel boreholes for PVC profiles
Ivpxmrgd
APPLICATION:
Used for cutting out handle sockets in aluminium and PVC profiles (openings, sockets for mounting locks, grips, hinges, opening channels etc.).
FUNCTIONS:
- Ease of use and operational safety through ergonomic design
- Possibility to open different channels independently of copy sets
- Copying sets
- Pneumatic clamps
- Triple drilling jack
- Pos...
9
ALCOR II R
PVC cutting centre
Used for cutting, milling, punching and marking on 4 surfaces of PVC profiles.
Bhmy3n9m09
Servo-controlled cutting
Servo controlled pivot axis
Automatic positioning in all degrees between 30° and 150° with servo drive
Robot with pneumatic handle and servo axis control and manual adjustment function for accurate profile positioning
Industrial PC with Windows-based touch screen and easy to use practical interface
Remote access Data transfer with remote control Network...
3
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC control syst...
3
SIRIUS automatic welding and cleaning centre (3 axes)
The centre is designed to weld and ring the four corners of PVC profiles
- minimum frame size 350x400mm - welding and cleaning
- maximum frame size 2540x4000m - welding and cleaning
- Welding and cleaning min size of the profile:
Bhrocyt39t
30mm height, 30mm width
- welding and cleaning maximum profile dimension:
200mm height, 150mm width
- welding seam thickness 0.2mm
- pneumatic operation
- automatic frame rotation
- large work programming...
