Tractor

HOLDER B 12 mit Mähwerk/ Staubox/ AHK

Condition: excellent (used), Year of construction: 2006, 70 linear meters Pallet Racking SSI Schäfer Palflex incl. Mesh Decks Used, good condition, see photos Year of manufacture: 2006 Bjdpfx Agskx E I Njkold Height: 4 m Depth: 120 cm Bay load: 12,000 kg Galvanized frames Red beams Mesh decks included! 2 mesh decks per 2.7 m beam length Negotiable price: €8,290 net ex stock The offer includes: + 26 pre-assembled frames, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg load capacity per level (evenly distributed load) + 200 safety clips + 100 galvanized mesh decks for 50 levels, each with a 2.7 m beam length + 104 concrete anchors + Load signs Goods in stock. Transport and installation available on request. Inspection by appointment at any time. Further information on request. Always over 5,000 linear meters of pallet racking from various manufacturers in stock. (Changes and errors in technical data, specifications and prices as well as prior sale reserved! See our T&Cs, all prices excl. VAT ex stock) Purchase / Sale We are continuously looking for and offering a wide range of items from various sectors clean-sweep business clearances company liquidations fast - flexible - efficient! We also clear out or dispose of assets for administrators. Send us a few keywords – we will contact you promptly. To access our site, please click on our logo!

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Bedpfx Agevv Dp Nekjld

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling Bjdpsw A Apyefx Agkjld - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: new, functionality: fully functional, power: 26.48 kW (36.00 HP), color: red, overall weight: 2,800 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, all wheel drive, cabin, pallet forks, We deliver machines to any European country! The FARMER 811 PRO wheel loader is one of our most popular models. We have been selling it for 10 years, meaning that hundreds of satisfied customers rely on it. Equipped with a 4-cylinder, 36 HP engine and a 2-speed transmission, this is a reliable machine for all industries. Its strong and robust design ensures operation under all conditions. TECHNICAL SPECIFICATIONS: - Manufacturer: KINGWAY DEUTSCHLAND e. K. - Model: 811 PRO - Full cab with heating, ventilation, road and work lighting, rear-view camera, radio - Hydraulic quick coupler - Suspension seat ENGINE DETAILS: - Engine: Yunnei DEF20NJF4 - Diesel - Cylinders: 4 - Emission standard: Euro 5 - Max. rated output: 18.2/25 kW / 25/36 HP at 2,800 rpm - Max. torque: 66.9 Nm at 1,600 rpm - Cooling system: Water-cooled - Noise level: 101 dB - Power supply: 12V - Battery: 12V / 120 Ah DRIVE: - Drive unit: Torque converter (2 driving ranges) - 4x4 wheel drive - Travel speed (range 1): 0-8 km/h - Travel speed (range 2): 8-20 km/h CAPACITIES AND PRESSURES: - Fuel tank capacity: 40 liters - Hydraulic oil tank capacity: 55 liters - Max. hydraulic oil flow: 48 L/min - Max. hydraulic pressure: 180 bar WEIGHTS: - Operating weight: 2,800 kg - Max. tipping load: 1,800 kg - Max. lifting capacity (at mount): 1,000 kg DIMENSIONS: - Steering angle: 42° - Turning radius (inner/outer): 2,350 mm / 4,200 mm - Lift height (lower edge of standard bucket): 2,580 mm - Dumping height (with standard bucket): 2,080 mm - Dumping angle: 39° - Standard bucket: 0.5 m³ capacity - Overall length: 4,650 mm - Overall width: 1,600 mm - Overall height: 2,450 mm - Track width: 1,270 mm - Wheelbase: 2,140 mm TYRES: - Standard: 31x15.5-15 agricultural tread - Optional: 10-16.5 industrial tread FEATURES: Bedpfxevz U Sxj Agkeld - Very high-quality, robust construction - Standard Euro mount - Lockable cab, tank and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy operation - Extremely maneuverable - Compact and highly versatile - Lighting system / road lighting - Hydraulic quick-change system - Third hydraulic circuit for attachments - CE certified to the latest standards and guidelines - Sale available net of VAT (with VAT ID only) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within 200 km - One FARMER 811 wheel loader / yard loader - Including bucket + fork (4-in-1 bucket available on request) - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - EURO MOUNT - ROAD APPROVAL - Float position - Operating permit for Germany For any of our loaders you can also order: - Trailer coupling - Additional counterweights - Any possible accessories such as scraper, grapple, snow plow, high-volume buckets, sweeper, grab bucket PRICE: €17,800 net €21,182 gross WARRANTY: - Each machine comes with a 12-month warranty, extendable for an additional year. - After the warranty expires, we ensure access to all spare parts for our customers. SERVICE: - We have our own mobile service, which supports all our customers both within and outside of Germany.

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm Bledpfx Aei Ezx Djgksd belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Condition: excellent (used), Viessmann Vitoplex heating boiler 150 kW (0069) oil burner Bsdpfjx Htirjx Agksld

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Bjdjv Rpr Sopfx Agkeld Control system: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min Bljdpjhqmamefx Agkod • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg Bsdpfx Agewnbfkjkold

Condition: new, functionality: fully functional, mileage: 1 km, power: 5 kW (6.80 HP), color: grey, overall weight: 2,150 kg, operation weight: 2,150 kg, lifting power: 1,000 kg/m, lifting height: 3,120 mm, tire size: 29*12.5-15, emission class: none, digging bucket width: 1,200 mm, Year of construction: 2025, operating hours: 1 h, Equipment: air conditioning, all wheel drive, cabin, hydraulics, low noise, pallet forks, standard shovel, trailer coupling, Motor: YQP5.72AF.48P Engine power: 5000 watts Battery: 72v 200Ah Standard tire size: 29*12.5-15 Drive: 4-matic Additional Functions: 1 Lifting capacity: 1000 kg Net weight: 2150 kg Bsdpfxjvcl T No Agksld Speed: 12 Km/h Hydraulic flow: 27 L/min Working pressure: 160 bar