Vertical machining center

Hurco VMX 50 - 40 T

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Prjdpfx Ajiv R Hlob Isd Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm Pedpou Ix Izefx Ab Ierd max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Psdsxcgtgepfx Ab Ijrd Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2008, x-travel 1626 mm y-travel 813 mm z-travel 762 mm Pedpfxowvl Daj Ab Iord control Haas table surface area 1.626 x 711 mm table load 1.814 kg rapid traverse 15,2 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 12,0 t dimensions 4,6 x 3,6 x 3,0 m Vertical Machining Center - chipconveyor - Dual tool change arm - internal coolant - filter - 4th axis - Oil dust collector - 2- speed Gearbox - cable less 3D touch probe

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Psdpfxov D U Apo Ab Ijrd Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 36 mm throat 300 mm bore stroke 160 mm 4 speeds 100 - 1600 U/min column diameter 145 mm table-size 500 x 370 mm total power requirement 2,2 kW weight 440 kg dimensions 1200 x 800 x 2300 mm comes from a vocational school Features: Prodpfx Aevzt Dyob Iod - automatic feed - infinitely variable speed control - digital speed display - adjustable drilling depth stop - drill spindle guard

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 U Closing 35 TO Pjdpfeg S I S Aex Ab Ijrd year 1997 Scrow 25 mm tie bar spacing 27x27

Condition: used, Year of construction: 2015, x-travel 600 mm Prsdpfx Aovu E Rlob Isd y-travel 800 mm z-travel 600 mm 0 1,7 + L µ Temperature range 20 °C weight of the machine ca. 1200 kg dimensions of the machine ca. 1319 x 1940 x 2710 m Gantry measuring machine on hard stone measuring plate with high accuracy, high- precision guides, wear-free precision air bearings, contactless scale system on all axes 0.1 µm, as well as with 3-axis CNC control, joystick,PH 10M rotary/ swivel head, measuring probe scanning kit 2 + scanning module kit. Dell OptiPlex system computer with LED monitor, keyboard, laser printer and software for graphical representation of the shape deviation, assistant for generating travel paths, simulation model, Excel protocol output, statistics module. Flexible exchange system for storing the scan modules. As is well known, measuring machines must be professionally dismantled by a specialist company and transported using special transport equipment. This costs approximately €3,500 + VAT. The machine has already been dismantled and issued with a certificate. It is in our stock now. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Psdpfjw Rl S Ssx Ab Iord Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Machine have 2 spindles. One for 6.300 min-1 SK 40 Prsdpforuauqsx Ab Ijd Second up to 42.000 min-1 HSK E40. Spindle replaced 2018.