Bandsaw - Horizontal

HUVEMA 300 S HA

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Ljdpsxg Nd Aofx Ab Uort Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame Lrodpsrl Irvjfx Ab Ujt - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. Lodpfx Abszbc Dte Uert range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet Lredpfx Aju Rni Hob Ust *

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. Lrjdpfxjzawm He Ab Uet The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm Lredju Dbvtjpfx Ab Uet 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch Ljdjt U R H Uopfx Ab Usrt • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device Lrodpfx Aotv Riasb Uot - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm Lrodpfxed Rxw Hs Ab Ust weight: ca. 1500 kg

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO Lrodpfxexl E Syj Ab Uet quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions