HSK FLOATING IMA AGGREGATE

IMA

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. Fodpfx Adjyttrxeaspd External reference: 6561

Condition: ready for operation (used), Year of construction: 2013, This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, it's ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine. Additional information Fpedox D Nh Ajpfx Adasd • Motor Power: 2 x 45 kW, 150 Hz • Motor Speed: 9000 rpm • Power Supply: 230 V • Heating Power: 6 x 500 watts • Adjustment Range: Vertical approx. 17 mm, Horizontal approx. 30 mm • Stroke: Max. 8 mm • Roll Diameter: Max. 850 mm • Edge Height: 14 – 65 mm • Workpiece Projection: Min. 30 mm + edge thickness, Max. 80 mm including edge thickness • Workpiece Length: Min. 130 mm • Workpiece Gap: Min. 300 mm • Workpiece Distance: Min. 990 mm • Workpiece Thickness: Min. 8 mm, Min. 12 mm with tracing wheel, Max. 80 mm • Single Tracing Workpiece Projection: Min. 30 mm • Double Tracing Workpiece Projection: Min. 38 mm for max. 4 profiles, Max. 50 mm • Cutter Head Diameter: 125 mm • Motor Shaft: 30 x 68 mm diameter • Internal Thread: M16, Depending on motor, left or right • Cutting Cross-section Motor Power: 0.20 kW, 200 Hz 400 V, 12000 rpm for max. 195 mm², Option: 0.66 kW, Extension to max. 1100 mm² • Tool Diameter: 160 mm / 48 teeth • Swivel Range: 0 and 25 degrees • Workpiece Speed: Max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge Overhang: Top edge, max. 3 mm, Bottom edge, max. 2 mm for straight edges • Edge Material: Edge, max. 4 mm for wood and plastic; Aluminum, max. 3 mm

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, number of axes: 3, controller manufacturer: SIEMENS, overall weight: 5,000 kg, spindle motor power: 12,000 W, spindle speed (max.): 9,000 rpm, This 3-axis IMA BIMA 310 120/300 CNC Wood Machining Centre was manufactured in 1999. If you are looking to get high-quality woodworking capabilities, consider the IMA BIMA 310 120/300 machine we have for sale. Contact us for more information. Additional equipment • 1 vertical drilling unit in Y Direction • 1 vertical drilling unit in X Direction • 1 main spindle with programmable direction of rotation • 1 centrally integrated CNC axis rotating 360 degrees • 1 adapter unit saw, fixed at 90 degrees • Saw blade diameter: 200 mm • 1 adapter unit horizontal drilling and milling head (cross head) • 1 adapter unit horizontal milling cutter (face milling) • 2x adapter units for hinge drilling • Includes 1 new Siemens vacuum pump + numerous accessories Machine Benefits Technical Machine Benefits • Max. Clamping height from top edge of the suction plate: z1 100 mm • Working height: 950 mm • Path operation speed: 20 m/min • Acceleration: 5 m/s² • Changing field area without pendulum machining: x 2 x 1400 mm • Free space in the middle: x 200 mm • With pendulum machining: x 2 x 900 mm • Free space in the middle: x 1200 mm • Tool feed: automatic • Feed force: 11000 n Extra Information Media Extraction standard: Connection for 200 mm, 120 mm, and 100 mm diameter Extraction speed: Approx. 28 m/sec Extraction volume: Approx. 3200 m³ per hour 1 vacuum pump 40 m³/h Compressed air: Central connection for 1/2" with maintenance unit. Air pressure 6 bar constant Fsdsx N Ulmepfx Adajpd Electrical Equipment Electrical installation according to EN Control cabinet dimensions (HxWxD): 2000 mm / 1200 mm / 600 mm Safety and protection measures according to CE regulations

Condition: ready for operation (used), Year of construction: 2002, This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine. Application Types Fpedpfx Aox D Iq Nsdasd Edge Banding

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 100 mm, number of axes: 3, spindle speed (max.): 24,000 rpm, This IMA BIMA 410 V was manufactured in 2005. It is a CNC woodworking machining center with integrated edge banding. Features include a working area of X-axis up to 6000 mm, Y-axis 1400 mm, and Z-axis up to 100 mm. It has a main spindle power of 7.5–11 kW and a speed range of 1,500 – 24,000 rpm. The tool changer has 18 positions. Edgebanding capabilities range from 0.4–3 mm in thickness. Contact us for more information. Machine Benefits Technical Machine Benefits • Automatic rotary changer, 18 positions • Vertical drilling head with up to 21 spindles (11+10) Fpedjyap U Aspfx Adajd Extra Information Edgebanding Unit VT 100 For 4-sided and frontal edging Edge thickness: 0.4–3 mm Edge height: 14–64 mm

Condition: ready for operation (used), Year of construction: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine. Additional equipment • Gluing Unit for Hot-Melt Adhesive: Single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm • End Trimming Unit: 2 motors, each 660 W, pneumatic swiveling 0° + 25° Fsdpjx D I D Ajfx Adajpd Machine Benefits Technical Machine Benefits • Min. Feed width: 244 mm (in longitudinal processing) • Max. Feed width: 3300 mm • Max. Workpiece width (with chain conveyor extension): 1300 mm • Min. Workpiece thickness: 8 mm • Max. Workpiece thickness: 45 mm (with copying function) / 60 mm (without copying) • Max. Feed width: 3300 mm • Fixed reference side: on the left in feed direction Extra Information Scoring Saw: 22 kW motor, 6000 rpm, pneumatically controlled Rough Trimming Unit: 80 kW motor, 6000 rpm Double Milling Unit: 2 motors, each 45 kW, 9000 rpm Flush Milling Unit: 2 motors, 1850 W, 12000 rpm Multifunction Unit: NC-controlled with 2 motors, automatic tooling for 4 profiles Buffing Unit: 2 motors, each 180 W, 1400 rpm Grooving Unit: 45 kW motor, 9000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Year of construction: 2014, condition: ready for operation (used), Main Drive Fpodpfjx D Nitjx Adaed Number of axis 3 This 3-axis IMA BIMA CUT 145/330 CNC Wood Machining Centre was manufactured in 2014. It features a working range of 3300 mm in the X axis and 1450 mm in the Y axis, with a spindle power of 18 kW. The machine includes a tool magazine with up to 18 positions and a vacuum clamping system for secure workpiece fixation. If you are looking to get high-quality milling capabilities, consider the IMA BIMA CUT 145/330 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,714 h, This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information. Additional equipment • Jointing cutter • Radiant heater • EVA gluing unit Fpedpsyaqbwjfx Adaed • Roll magazine for edge material • Cutting unit • Flush milling top/bottom • MFA with 2 motors for radius r2, servo-controlled • Profile scraper unit • Surface scraper unit • Buffing unit Machine Benefits Technical Machine Benefits • Feed speed: 20 m/min Extra Information Machine still under power

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 6200 kg Fodjx D Rt Hopfx Adaepd Main Drive Spindle speed range 8000–24000 Number of axis 3 Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Z-Axis Movement 100 mm This 3-axis IMA BIMA 210 120/300 was manufactured in 2006. It features a large axis travel (X = 3000 mm, Y = 1200 mm, Z = 100 mm), accommodating workpieces up to 2800 mm in length and 1200 mm in width. The main spindle delivers power of 7.5 kW with speeds ranging from 8,000 to 24,000 rpm. It weighs approximately 6200 kg and includes IMA IMATRONIC CNC control. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L Fedpex U U Dtjfx Adaepd 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm