Bending machine

Indumasch Minibend 20

Condition: used, functionality: fully functional, Year of construction: 1989, roller (top) diameter: 200 mm, side roll diameter: 150 mm, sheet thickness (max.): 6 mm, working length: 3,000 mm, Working length 3000 mm Bending capacity 6 mm Bending capacity 4 mm Top roller diameter 200 mm Diameter of side rollers 150 mm Hydr. folding bearing Iajdpfxouzm Ayj Adwol

Condition: used, Cutter Manufacturer: Seydelmann Model: K 204 Ultra Made of stainless steel Volume: 200 liters Ijdpfx Adetu I T Eswsal 2 knife speeds 2 bowl speeds 2 mixing speeds Dimensions: 280x205x255cm Electric power: 78kW Voltage: 400V, 3 phases, 50 Hz

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Iaedeghrguepfx Adwjl Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: excellent (used), Year of construction: 2019, ROTOTHERM REC1280 Rotary Oven, Gas-Fired The Rototherm oven with a rotary rack is designed for baking: – bread – tin/toast bread – buns/rolls – small pastries Technical specifications: Rotary wheel diameter: 1260 mm Max tray size: 600 x 1000 mm Baking surface with 21 shelves: 12.6 m² Max rotary plate load: 350 kg Baking chamber height: 1830 mm Iaedpow Uih Sofx Adwol Max rack height: 1813 mm Minimum room height: 2830 mm Dimensions (W/D/H): 1740 x 1900 x 2400 mm Net weight: 2400 kg NAVIGO II control: yes The ROTOTHERM Green rotary oven by Werner & Pfleiderer is a new-generation rotary oven providing up to 25% energy savings compared to the standard RE oven. Recipes are protected by access codes. The system allows programming of up to 250 recipes with 20 steps each.

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Isdpfsvvkdtsx Adwoal

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, operating hours: 76,500 h, machine/vehicle number: 080430, laser power: 3,200 W, punching force: 22 t, punching diameter: 64 mm, type of input current: three-phase, working range: 1,250 mm, Equipment: cooling unit, documentation/manual, safety light barrier, machine in very good condition, fully functional and reliable. currently dismantled and prepared for immediate removal. I can provide videos of operation. help with assembly. Iodpfowwumyjx Adwsal

Condition: used, machine/vehicle number: XLER6X2000510xxxx, mileage: 6,78,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 20681 Specifications: Model year: 2004 Mileage: approx. 678,000 km Transmission: Manual Suspension: Full air Tires: See photos Length: 938 cm Width: 250 cm Wheelbase: 490 / 136 cm Curb weight: 10,100 kg Driveline: 6x2 Power: 420 hp Equipment: Tool compartment Tow hitch Iodpfxowqwmcs Adwsal Bed Radio/CD Air conditioning / climate control Description:Scania R420 6x2 container truck, model year 2004.The truck starts and runs, but some repairs and investment will likely be required to pass EU roadworthiness inspection. Note: The container body is not included. Available for quick delivery upon agreement. Km: 678000 HK: 420 Technical approved: no EU-approved until: 12.07.2024 Own weight: 10100 Total Weight: 27000 Payload: 16825 Width: 250 Length: 938 Euro: 3 Model: R420 Gearbox: Manual

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 Isdpfewb Scmox Adwsal PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: used, Year of construction: 1987, pressure / t stroke / mm Iasdpfx Adeuddcaswel table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: excellent (used), Year of construction: 2003, operating hours: 31,486 h, Medium format Iaedpfx Aoxl R I Tedwjl Operating hours: 31,486 h Price on request