Workbenches

INDUSTRIEWERKBANK 2000

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Gedpfx Ajd Dhwnjh Hjtt Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Various other configurations available

Condition: new, table length 2000 mm table width 1000 mm table height 920 - 1000 mm weight of the machine ca. 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Gtsdpfx Ahevn Uycj Hst Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional!! Accessories shown are optional!!

Condition: new, length 1150 mm width 610 mm height over floor 910 mm table load capacity max. 450 Kg dimensions 1170 x 640 x 135 m weight 47 kg Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. ( IP20 ) Godpfxsu Imhvj Ah Hott

Condition: used, Bernardo CSM2000 circular saw-milling machine, in good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kg Gedpsx H Ufbofx Ah Hstt Prices subject to change, errors and misprints excepted.

Condition: used, Year of construction: 2007, Technical data: Cable extension: 2000 mm Lifting height: 2000 mm Load capacity: 22 - 32 kg Weight: 13.5 kg Description: - Secure suspension of device and supply cable - In a “weightless” state - Constant tensile force Gtjdpfx Ahor Dg Hzj Hot - Tear-resistant steel cable

Condition: used, 2 Work areas Work lights Electrical box Godpfxjvt Uato Ah Hett 3.7kw motor Voltage 380V

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V from the Seevetal location, Gtsdpevl Euxofx Ah Hjt without transport, as seen, subject to prior sale.

Condition: good (used), Note: The images are for illustrative purposes only. Gedpfx Ahewgicbj Hstt - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.