Used Notified Aluminium Shredder 750 Kw for sale (44,049)

Condition: used, Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block Ihsdpfjpm Th Esx Adwjt -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg

Condition: excellent (used), Year of construction: 1990, power: 55 kW (74.78 HP), operation weight: 4,000 kg, 1 1 Trough Conveyor Belt TFB 500x7500 – 2 1 Vibrating Feeder Trough VR 400x3500 – 3 1 Vibrating Screening Trough VSR-1/500x12500 – 4 1 Metal Detector – – Ijdpsw T Rw Sefx Adweht 5 1 Drum Chipper RE-TH 150/500/3 – 6 1 Screening Machine VSR-1/1000x4000 – 7 1 Scraper Conveyor ZKF 75/60/2x21000 –

Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK, HAMMEL 750 E Iedpfxsx Szhyj Adwsht - Power 2 x 110 kW electric - with long discharge conveyor The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change The machine can be seen in working condition on our site at D-59329 Wadersloh.

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available Ihsdjbunq Hopfx Adwst

Condition: used, Year of construction: 2011, operating hours: 4,950 h, functionality: limited functionality, machine/vehicle number: 80, rotational speed (min.): 16 rpm, power: 261 kW (354.86 HP), We purchased the machine new in 2011. Since the end of 2020, we have had a new unit, and the VZ 750 D has been barely or not at all used since then. The machine is still operational and can be demonstrated. The combs are new, the belts are in good condition. The engine (CAT C9) runs and has power, emits smoke under full load as there is no exhaust gas aftertreatment installed. The Arjes can be inspected by appointment. Please submit your questions in German; we will answer them promptly. The price is negotiable. Ihedpfx Adjx Tp T Tjwot

Condition: ready for operation (used), Year of construction: 2006, operating hours: 4,450 h, functionality: fully functional, number of blades: 5, overall weight: 19,000 kg, power: 257.42 kW (349.99 HP), fuel type: diesel, color: red, motor manufacturer: CAT, motor model: CAT C9, Field of application: suitable for processing aluminium, white goods, light sheet metal scrap, alloy wheels, various types of waste, and wood. Shafts with 7/7 discs, each with 5 knives per disc. Robust hook lift frame. Wheel axle with drawbar. Radio remote control. Permanent overband magnet. Iedpfxsx S I Elo Adwoht

Condition: refurbished (used), Year of construction: 2008, operating hours: 8,200 h, overall weight: 46,000 kg, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet Iedpfx Adsxb Et Ajwjht - Central lubrication - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Condition: new, fitted in Hammel VB650/750 Lindner U75 Arjes VZ750 Shredder Shafts ( NEW ) in set MADE IN GERMANY all types availlable WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness. Ihsdpefgl Najfx Adwet

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Ihodpfexf Aqtjx Adwjt Electric drive: 250 kW Discharge conveyor Overband magnet

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Radial fan in galvanized housing with sound insulation -Engine power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Inlet connection: Ø 800 mm -Outlet connection: Ø 750 x 600 mm Ijdpfx Asb A H Rasdwsht -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Condition: new, mileage: 60 km, power: 87 kW (118.29 HP), fuel type: electric, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, total length: 6,450 mm, total width: 2,100 mm, total height: 2,310 mm, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, = Additional options and accessories = - Heated exterior mirrors - Passenger bench seat - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Air conditioning - LED daytime running lights - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Reversing camera - Side door - Immobiliser - Heated windscreen - Partition wall = Further information = General information Number of doors: 2 Year of manufacture: 2026 Cab: single Ihodpfx Aowzizysdwst Axle configuration Front axle: Max. axle load: 1,850 kg; Steered Maximum rear axle load: 2,100 kg Weights Gross vehicle weight: 3,500 kg Functional Tail lift: D'HOLLANDIA DH-LMA.08, tailgate, 750 kg Condition General condition: very good Technical condition: very good Visual condition: very good

Condition: new, We would like to offer shafts specifically designed for medium-sized shredders equipped with side combs, a breaking bar, and a cassette system. Suitable for models: LINDNER U75, ARJES VZ750, HAMMEL VB750OL, NOVA 75DK Ijdpfox Hhwdsx Adweht - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA is a company with a 21-year history, specializing from its inception in the manufacturing of spare parts and complete recycling systems. In recent years, we have expanded our product range to include grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have successfully reduced production lead times while maintaining consistently high quality standards. Grinding shafts are a serial product, which also allows us to collaborate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? The answer is simple: - Certified 3.1 materials - TUV SUD Rheinland quality assurance - ISO 9001 certification - Automated welding processes / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department able to fulfil any customer-specific requirements - In-house Research and Development Centre Building long-term customer relationships is our top priority, as your satisfaction is our success!

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor, with reduced knife protrusion, suitable for both hard and soft materials + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Sample image above: color of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta starter - Fast hydraulic system - Automatic shutdown in rotor idle mode - Speed: 70–90 rpm for high throughput - Cycle control to minimize idle times - Performance-enhancing step control of hydraulic pusher Ihodpfex Af Rdjx Adwjt - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *Visible in the last 2 images. - Additional blade row + €2,790 - Segmented bottom + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation) - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Synchronous start-stop with shredder) - Enlarged feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, subframe/base divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Iedpfxov Hr Nxj Adwoht

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system with a screw conveyor is an efficient industrial setup designed to process large volumes of materials into smaller, more manageable pieces. Ihedpfx Adstpuqyjwet ♻ The system consists of a powerful shredder capable of breaking down various materials and a screw conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal. Technical data: Shredder: ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 939 x 567 mm ✔ Weight: 1250 kg Screw/snail conveyor: ✔ Length: 4300 mm ✔ Height: 2800 mm ✔ Power: 1,5 kW 1 years warranty or 1000 working hours

Condition: good (used), gear motor, electric motor -Speed: 750 rpm -Power: 0.8 kW -Design: B3 -Shaft diameter: Ø 25 mm -external fan -Protection class: IP 44 Iedpob A R Nnjfx Adwjht -Weight: 26 kg -Overall dimensions: 650 x 230 x H190 mm

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 28 Iodpfx Adoiq Uz Rowsht ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology Isdpjxlcqtofx Adweht -Condition: Single-shaft shredder is equipped with a good set of blades. -Manufacturer: Vecoplan, Side-mounted mill cutting mill -Type: VAZ120/105 -Processing capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter blades: 1 piece -Inlet cross-section: 1240 x 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg

Year of construction: 2024, condition: new, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 870 mm Iodoiq Uz Hspfx Adwsht ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm Iedpfx Adjtpvdhowoht ✔ Number of cutting knives: 28 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Weight: 1750 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Year of construction: 2024, condition: new, ♻ The model SD 45 is characterized by a low power connectivity, high productivity, ease to use with a long warranty period. ✔ Power: 11 kW ✔ Shaft length: 430 mm ✔ Shaft diameter: 160 mm ✔ Shaft RPM: 265 rpm ✔ Number of cutting knives: 15 Isdpfx Aohrnaqodwsht ✔ Granulation: 10-50 mm ✔ Capacity: up to 1,5 m3/h* ✔ Material discharge opening: 152 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, etc.) ✔ Filling opening: 620x430 mm ✔ Dimensions L/W/H: 0,95/1,08/1,91 m ✔ Weight: 920 kg 4 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Ihjdsiq U D Espfx Adwot ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg Ihjdpfx Aeiq U A Ssdwst 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm Iedpfehwwpzox Adwjht ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Ihodpfx Ajtpwlredwst Shredder: ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Weight: 2450 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours