Frame saw sharpening machine

ISELI GAP 100

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Rjdpfeqabm Esx Abhsw Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Rsdpfxoumrf Ao Abhjw Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Rjdpjun Sd Usfx Abhew Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Rodpfxoi E Trps Abhew

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 47 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Redpfxef Ey Ume Abhow Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Technical details: welding current: 520 A Length: 1200 mm height: 1100 mm Rodpjwc R Udofx Abhew weight of the machine approx.: 147 kg dimensions L x W x H: 1,2 x 0,75 x1,1 m Welding process TIG/E/MIG-MAG Delivery consists of: Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) Rjdpslkgvbofx Abhsw spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: excellent (used), HSS saw grinder VOLLMER model CMS 10M Rjdpfoi Hchdjx Abhew

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Rjdpswtctmefx Abhsw Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm *

Condition: used, Valon Kone VK26M Rjdpfx Abevgtz Nshjw With infeed and outfeed conveyors.