Havy duty

ITS ITS 850X700 E

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW Bodpfsx Tp U Rjx Amneli - good condition - available immediately

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted Bsdpotvau Asfx Amneli After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: ready for operation (used), Year of construction: 2020, working width: 520 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, working length: 2,310 mm, This SCM Abricht/ Dickenhobelmaschine was manufactured in 2020. It features a working width of 520 mm and an adjustable thicknessing height from 3 mm to 250 mm. The machine includes a "TERSA" cutter block system with 4 disposable knives and offers four feed speeds. Consider the opportunity to buy this SCM Abricht/ Dickenhobelmaschine wood planer. Contact us for further details. • Working width: 520 mm • Thicknessing height: 3–250 mm (adjustable) • Surface table length: 2,310 mm • Feed speeds: 5 / 8 / 12 / 18 m/min Bsdpfx Ajyiucqsmnsli • Cutter block: TERSA system, 4 disposable knives, 120 mm diameter • Control unit: READY electronic control • Programmability: up to 99 programs • Axis control: motorized vertical adjustment of thicknessing table with digital position display • Power-assisted changeover: pneumatic/hydraulic automatic lifting of surfacing tables • Supply voltage: 400 V, 3-phase, 50 Hz • Main motor: 9 kW (12 HP) with automatic star-delta start • Braking: automatic electronic motor brake • Suction: 120 mm extraction outlets for surfacing and thicknessing

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Blodpfx Amotu Il Tsnoi Honing device Wet sanding device

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Bodpfoq E Ti Hsx Amnsli If you want to try it, please bring cable.

Condition: used, Used Urschel model 1700 stainless steel Comitrol Processor. Recommended for size reduction applications of free-flowing dry and semi-dry products. Processor is designed to install three different reduction heads - slicing head, cutting head or microcut head (ONLY microcut head is inlcuded). Microcut rotor head is driven by 22 kW, 2938 rpm, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm lenght x 900 mm wide x 1800 mm high, weight approx 500 kg. Bodpfx Ameltlulonjli

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Bledog Snt Sepfx Amnoi Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: new, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2500 kg - Tank capacity approx. 100 liters - Hand protection guard in the area of the control panel and opposite - Color scheme: Housing RAL according to customer requirements Blsdjftnt Nopfx Amnoi Protective guard/knife bar RAL 1028 melon yellow Made to order Price and further information on request.

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Bjdei Igikopfx Amnsli Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW 400 V Blodpfofhb Tisx Amnsi