Agricultural machine

Iveco Motor, Iveco StralisAT260S46Y/FS, aus

Condition: good (used), overall weight: 5,100 kg, fuel type: diesel, fuel: diesel, Year of construction: 2005, PROD - ATLASCOPCO TYPE - XAS426 S/N - YA3-062854-50542371 Dwjdet Srw Aspfx Apteb YEAR - 2005 POWER (kW) - 166 PUMP. (m3/min) - 25 CIS (bar) - 7

Condition: new, Year of construction: 2024, functionality: fully functional, Item: A-11297-Silostank 95m3 Exterior dimensions: Dia Ø 3300 mm Total H 11647 mm Stainless steel tank - 3 pcs. AISI 304 Outlet height 400 mm Top of the tank: Air in/outlet 500 mm with gauge Inside : polished weld Dwsdpfsua U Hzex Aptob Thickness of plates: Bottom: 4 mm, Cylinder : 4 and 3 mm, Top : 3 mm Possible to choose color of outside plates if you need insulation.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 24,400 l, total height: 5,115 mm, inner diameter: 2,900 mm, outer diameter: 3,100 mm, overall weight: 4,500 kg, wall material: stainless steel, wall thickness: 4 mm, wall structure: double-walled, number of chambers: 1, operating temperature: 40 °C, operating pressure: 3 bar, Equipment: CE marking, Stainless Steel Pressure Vessel (Beer Tank), Insulated, Temperature-Controlled Technical Data / Dimensions Available units: 1 Volume: approx. 24,400 liters Type of vessel: Pressure vessel Condition: factory new Dwedoy Sb Hvjpfx Aptsb Food-grade: yes Construction: vertical, standing Notes: Beer tank / Beer pressure tank Internal diameter: approx. 2,900 mm External diameter: approx. 3,100 mm Cylindrical height: approx. 2,900 mm Total height: approx. 5,115 mm Shell thickness: approx. 4 mm Weight: approx. 4,500 kg Specific gravity of medium: 1 t/m³ Operating pressure: overpressure Maximum operating overpressure: 3.00 bar Test pressure: 4.30 bar Bottom wall thickness: approx. 8.0 mm Top wall thickness: approx. 8.0 mm Shell/cylinder wall thickness: approx. 4 mm Floor clearance: approx. 430 mm Material / Properties Inner shell material: stainless steel Material grade: V2A-1.4301 (AISI 304) Double jacket material: stainless steel Legs material: stainless steel Outer surface: mill finish, IIB Inner surface: 2B mill finish Internal weld seams ground Notes: Tank ends (heads) internally ground, Ra < 0.8 µm Heating / Cooling System Heating / cooling system included Number of cooling zones: 4 Cylinder: Pillow Plates / Thermoplate (outside) Bottom head: Pillow Plates / Thermoplate (outside) Cooling medium: glycol Operating pressure: 4 bar Operating temperature: -10 / +40°C Double jacket volume: approx. 61 liters Heat / cooling surface area: Bottom head: approx. 3 m², Cylinder: 3.2 + 12.1 + 5.6 m² Heating / cooling system material: V2A-1.4301 (AISI 304) Insulation Insulation included Insulation thickness: approx. 100 mm Insulation material: perlite Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Equipment Supporting form: legs Number: 4 Fixing: fixed Height-adjustable legs Top end: torispherical (Klöpper) head Bottom end: torispherical (Klöpper) head Top head: 2 x crane lugs 1 x threaded nozzle DN 100 (for vacuum valve) 1 x threaded nozzle DN 80 (for cleaning, venting, and valve combination (RLV)) 1 x welded socket DN 65 (pressure measurement) 1 x thermowell TM251 (temperature measurement) 1 x ladder bracket Shell: 1 x sanitary manway (350 x 450 mm) with swing arm 1 x cable conduit DN 10 to manway 1 x CIP line DN 50 1 x threaded nozzle DN 10 (sampling) Bottom head: 1 x outlet DN 50, extended to the front in threaded nozzle DN 50, terminating 1 x welded socket DN 65 (pressure measurement) Notes: Tank is unused and in original packaging. Documentation Drawing Test certificate CE declaration of conformity Parts list Material certificates

Year of construction: 1989, condition: good (used), Operating hours: 17 Machine number: 160973 Power: 4,500 W Voltage: 220 V No-load voltage: 320 V Current: 16 A Dwjdpfebfa Hwsx Apteb Insulation class: F Cooling type: F

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. Dwjdpfx Apjzlhp Uoteb You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Caterpillar 938M 5.5m3 heavy duty bucket In excellent condition Dodjwa R Tbopfx Aptjwb

Condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Function: double-acting Dwjdpfjdcfmuex Aptjb -Piston diameter: approx. 60 mm -Piston rod: Ø 50 mm -Cylinder tube outside: Ø 80 mm -Stroke: 1200 mm -Total length retracted center hole: 1460 mm -Piston rod mount: Ø 30 mm -Cylinder mount: Ø 30 mm -universally applicable: -Number: 2x cylinders available (1x without eye) -Price: per piece -Dimensions: 1530/100/H80 mm -Weight: 36 kg/piece

Condition: used, Year of construction: 1979, This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions. Dwodpfx Apjzty Ifjtsb Additional title: puffer tank Capacity: 17800 l Working pressure: 4 bar Length: 4,8 m Width: 2,4 m Height: 3 m Weight: 2000 kg Material: stainless steel Position: horizontal Features: DN80 Periphery: After consultation, we can equip the tank with the desired fittings as far as we have them in stock.

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Note: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the cab! • Manual transmission • Differential lock • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! = More information = Dsdpfxewmpcns Aptjwb Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable)

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg Dwedeu R S A Djpfx Aptob - new exhibition machine -