Flat grinding machine

Jung

Condition: used, Year of construction: 2003, Surface and Profile Grinding Machine table clamping surface approx. 600 x 250 mm grindable workpiece area (including 25 mm wheel width) approx. 600 x 300 mm max. permissible table load including magnetic plate approx. 130 kg height above floor approx. 1085 mm main spindle drive speed range 800-4200 rpm drive power 10 kW cutting speed 35 m/s grinding wheel diameter 300 mm, width 25/30 mm, bore 76.2 mm X-axis pendulum grinding travel speed (hydraulic, infinitely variable) 1000-24000 mm/min X-axis creep-feed grinding travel speed (AC servo motor) 5-1000 mm/min usable pendulum stroke 630 mm machine weight approx. 3400 kg, total weight approx. 3800 kg Nodozwfzlepfx Ahnolf electrical supply 400V, 3-phase, 50Hz, rated current 30A, connected load 16kVA, supply fuses 35A

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Nlsdpfx Asxdxhrjhnsf Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, CNC Surface Grinding Machine CNC control Siemens Sinumerik with handwheel, GRIPS 32 control software spindle drive motor type MS501/5 machine weight approx. 2300 kg, total weight approx. 3500 kg electrical supply 400V, 3-phase, 50Hz, rated current 29A, connected load 20kVA, supply fuses 50A Table clamping surface (standard): approx. 500 x 250 mm, other sizes available upon request Grindable workpiece area incl. 25 mm wheel width: approx. 600 x 300 mm Grindable workpiece area with VJCE cover incl. 25 mm wheel width: approx. 600 x 290 mm Distance from table top to upper limit switch (Y) at 250 mm wheel diameter: approx. 366 mm Max. permissible table load incl. magnetic plate: approx. 130 kg Height above floor: approx. 1085 mm Main spindle drive speed range: 800-4200 rpm, other options available upon request Main drive power: 10 kW at max. rpm, option 5 kW at max. rpm Cutting speed: 35 m/s, other options available upon request Grinding wheel diameter: 300 mm, option 250 mm Grinding wheel width: 25/30 mm, option 50 mm Grinding wheel bore: 76.2 mm, option 50.8/51 mm available upon request Radial wheel wear allowance: approx. 45 mm X-axis pendulum grinding speed (hydraulic, infinitely variable): 1000-24000 mm/min X-axis creep-feed grinding speed (AC servo motor): 5-1000 mm/min X-axis travel between limit switches: approx. 660 mm X-axis usable pendulum stroke: approx. 630 mm Y-axis travel speed: 0.1-2000 mm/min Y-axis travel between limit switches: approx. 360 mm Y-axis measuring system resolution: 0.0002 mm Z-axis travel speed: 0.1-2000 mm/min Nljdpfszwfmhsx Ahnef Z-axis travel between limit switches: approx. 280/275 mm Z-axis travel between limit switches with JC/JCE cover: approx. 270/265 mm Z-axis measuring system resolution: 0.0002 mm Installation length: approx. 3400 mm Installation width: approx. 2700 mm Installation depth (without control pendant): approx. 2440 mm Machine weight without full enclosure and control cabinet: approx. 3000 kg Machine weight with full enclosure and control cabinet: approx. 3700 kg Supply voltage: 400V AC -5% to +10%, 50 Hz, option 60 Hz Control voltage: 230V AC / 24V DC Connected load at 5 kW / 10 kW grinding power: 13.5 / 20 kVA Fuse protection: 35 A Data Cooling Unit (Erba/Schüler): equipment no. 85056334 Data Cooling Unit (Hyfra Pedia TRK 20-EF): equipment no. 85056333, year 2004 Data Filter Unit (Airtech MFE 20-SP): serial no. 393196, year 06/2004, rated voltage 230/400V, rated current 3.0A

Condition: used, 1 unit of a DAF XF truck with a roll-off tipper / hooklift system for GERGEN JUNG GRK 21/70 Apollo containers Vehicle type: Truck Body type: Truck for ATL with roll-off system Manufacturer: DAF Truck Type: AT First registration: 06/02/2010 Mileage: 389497 Fuel: Diesel Rated power: 375 kW / HP: 510 Engine displacement: 12902 Official license plate: FN AO 9000 TÜV (technical inspection): 12/25 Number of vehicle keys available: 1 General condition: as per images and inspection Equipment: as per images and inspection Available vehicle documents: Registration certificate I: yes Registration certificate II: yes Color: as shown in the images, as per images and inspection Vehicle ID XLRAT48MS0E873575 Condition: used Location of the goods: storage area near the turning plate Payment method: prepayment by bank transfer Nlodozvdhbspfx Ahnef Shipping: Self-collection only from the Tettnang location Sales option: The vehicle is sold as is, without inspection, and in a de-registered condition. As there is no insurance coverage, the vehicle must be transported with a different axle or with red license plates.

Condition: good (used), Table milling machine, table milling machine Njdpfx Ahocl Svvjnolf -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: used, maximum load weight: 18,500 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 02/2013, next inspection (TÜV): 03/2027, loading space length: 7,800 mm, loading space width: 2,550 mm, total length: 10,253 mm, total width: 2,550 mm, Year of construction: 2013, Equipment: ABS, Jung T2MA24L ADONIS | 3-axle trailer | 3 x Mercedes-Benz axles | Duomatic | Twin tires VIN: HJ08228 CHASSIS / COMPONENTS * 3 axles * 3 x Mercedes-Benz axles * Air suspension * Lifting and lowering * Pneumatic chain tensioner * Pneumatic drawbar lowering * Disc brakes * ABS * Duomatic connection * ABS electrical connection * 15-pin electrical connection Wheelbase axle 1-2: 4,320 mm * Wheelbase axle 2-3: 1,400 mm DIMENSIONS * Overall length incl. drawbar: approx. 10,253 mm * Chassis length: approx. 7,800 mm * Rear overhang: approx. 1,235 mm TIRES * Tires: 265/70 R19.5 * Twin tires * Axle 1: approx. 10/60 + 10/60 % * Axle 2: approx. 40/40 + 30/30 % * Axle 3: approx. 60/60 + 60/60 % WEIGHTS * Permissible total weight: 24,000 kg * Tare weight: 5,500 kg * Payload: 18,500 kg OTHER * Year of manufacture: 2013 * First registration: 21.02.2013 * MOT: 03/2027 * Inspection: 09/2026 Nledpszwav Defx Ahnjf New MOT/inspection and weight adjustments (increase or decrease) are available upon request. We won't leave you alone, even after the purchase: We will help you obtain export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to assist you! We speak German, English and Russian. All information is without guarantee. Subject to change, errors, printing and typographical errors and prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of preparation and distribution of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That's why we support you personally and reliably – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transport We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transport If desired, we will arrange for the transport of your vehicle within Germany.

Condition: good (used), Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking bays: 01 unit Length per racking bay: 19,559 mm Number of fields per racking bay: 07 units Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per field: 09 units Number of pallet spaces per bay: 63 units Total number of pallet spaces: 63 units Based on: Load handling equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of supply: 08x Pallet racking uprights, used Material color: green Frame profile: M94 Profile dimensions: 76.2 x 74.7 x 2.3 mm including cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) Height: 2,710 mm Depth: 1,050 mm 28x Pallet racking beams, used Material color: yellow Nsdpfjzu Nwrex Ahnolf Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Connector: 5 hooks clear width: 2,707 mm max. load per pair of beams 2,400 kg, with evenly distributed load. 56x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 32x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on field and bay loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t Nedpfx Ahowl A H Djnolf

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2007, * BPW axles * Gergen GJ-SRK 30/75K roll-off body, year of manufacture 2007 * Unladen weight: 9,500 kg -----Internal vehicle number: 10757----Errors and prior sale excepted. WhatsApp support available! Nedjwbyphjpfx Ahnelf If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Nodpfx Ahezu S Utjnolf

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Njdpohp Rcrsfx Ahnelf Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Njdpfx Aszg Iqnehnelf

Condition: good (used), functionality: fully functional, SINUS – Magnet by JUNG model HF 50 RD Nlodpfx Ahezt Sx Nonjf Width x Depth: 450 x 175 mm Pitch: 9 mm

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t Nledpfx Asunt Iuehnjf dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 5645, input voltage: 380 V, type of input current: three-phase, total width: 1,600 mm, total length: 2,000 mm, total height: 1,700 mm, overall weight: 2,150 kg, power: 8.2 kW (11.15 HP), input frequency: 50 Hz, input current: 15 A, table length: 600 mm, table width: 200 mm, number of digital displays: 1, Hydraulic surface grinder with electromagnet and digital readout. Njdpfxezt Ibys Ahnolf