Millinghead vertical

KÖPFER Schneckenfraeskopf

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: iSeries, table load: 400 kg, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis DOOSAN DNM 4500 was manufactured in 2019. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. • Table size: 1000 x 500 mm • Tool changer: 24-position ATC • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z): 18 m/min • Coolant system: Included Ffodpfx Aox E Egajdasw • Full safety enclosure Additional equipment • NC rotary for 4th axis Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min Fodpfjvxwxvex Adaefw feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Year of construction: 2012, condition: like new (used), Parts shown by hand not come. With machine come tool holders SK 40. Fjdpfelpcdwox Adaofw

Condition: excellent (used), Year of construction: 2014, operating hours: 9,000 h, functionality: fully functional, Vertical machining center model Doosan DNM 400 II available from the end of September, year 2014, in excellent condition. Equipped with Fanuc CNC, high-pressure pump, 12,000 rpm spindle in perfect condition, DIN40, 30 tools, automatic doors, tank with LNS chip conveyor. Roller guideways. Fodpjw Uk I Hofx Adajfw

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, total height: 2,600 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 12 bar, spindle motor power: 17 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​3-axis vertical machining center with HEID CNC. TNC-530 Fodpfsx Da Rusx Adajfw

Condition: new, Year of construction: 2026, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Ffedpfx Asfy Ttiedaew Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 For more information please visit our web page or contact us

Condition: excellent (used), Year of construction: 2018, CNC control: Fanuc Series Oi-MF New machine, only 150 spindle hours - Flat guideways - Gearbox - Internal cooling - Various tool holders and 1 vise Travel paths X-travel 850 mm Y-travel 530 mm Z-travel 530 mm Spindle nose (to table surface) 100-630 mm Spindle axis to column surface 590 mm Table Table size 530 x 950 mm Maximum table load 800 kg T-slots (W x NO. x P) 18 x (5) x 100 mm Spindle Fodpjwa Ip Hsfx Adaefw Spindle speed 8000 rpm Spindle mount BT-40 Spindle power 7.5/11 kW Feed rate Rapid positioning speed 20 / 20 / 20 m/min. Cutting feed rate: 1 – 10,000 m/min. Automatic tool changer Number of tools: 24 Tool taper: BT-40 MAS Tool holder bolt: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Floor area: 2450 x 2700 mm Machine weight: 6000 kg Max. machine height: 2900 mm Air supply connection: 7 kg/cm2

Condition: ready for operation (used), Year of construction: 2006, A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. Fedjrdhh Iepfx Adasfw

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 t Ffedoxzuziopfx Adasw dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 2004, Technical details: voltage: 400 V / Hz total power requirement: 0,37 kW dimension machine xH: L:2,7 x B: 0,7 x H: 2,0 m Scraper belt conveyor combined with cooling water system and torque shut-off Discharge length D=280mm Ffjdpsv N Ekbsfx Adaew Chip infeed width F=325mm Insertion height B=approx. 160mm Insertion height B+I=220mm Chip infeed width F1=300mm Chip infeed length=700mm Floor clearance I=60mm Discharge height above floor C+I=950mm Equipment 2x support feet *