Screw air compressor

Kaeser TC 44

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode Nlsdpfx Aiszlbpzjrsh - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Nljdpfet Hal Dox Aireh Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Nodex A Tgyopfx Airslh Gluing System: PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right Nedpforg Exrsx Airolh 5th wave: top 6th wave: bottom 7th wave: uni-wave

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Nlsdpfx Aeytp Hreirsh

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Nljdpfx Aiewkrqpersh Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Njdpfxoy Iplfs Airelh Very little use Ex Pharma Facility

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock Nodpfszk N U Aex Airjlh - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Condition: ready for operation Machine type: machining center If you have any questions or need more information, please feel free to send us a message or give us a call. Nsdpfex Nw Drjx Airjlh

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Nlodpfxov R Nk Ue Airoh Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim