Flame-Cutting Machine

KAI TEC Plasmaschneidanlage 1500x3000

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Bedewz I Acopfx Addjlr Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: Blodpfx Adehrkrtedsr 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bsdpefg E H Tofx Addjlr Bimetal saw band for solid and profile material Tools and instructions for use

Year of construction: 2017, condition: ready for operation (used), Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Bjdpfxevyiqgj Addelr

Condition: new, Year of construction: 2024, Working width: 380 mm Working height: 150 mm 1. Unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2. Unit, brush: Scotch Brite Hard / diameter 210 mm, variable drive Height adjustment: handwheel Height display: mechanical counter Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg Bodpfx Adstnf Rrodslr

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Can be tested under power. Bjdpfx Adswxw S Ijdslr

Condition: used, Laser Stereo Camera Factory refurbished with warranty The Leica BLK3D is a photo-based measurement solution. Each photo captured is a complete measurement report containing height, width, and depth measurements. Measurements can be created at any time, immediately on-site using the handheld BLK3D imager or at any time afterward using the BLK3D desktop software. The BLK3D device combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection capabilities to perform in-image measurements with professional accuracy. Each captured image is a complete and precise 3D measurement report. Blsdpfxev Ntbbs Addjr Stereo Camera: Field of View 80° Focal Length 4 mm Aperture F 3.0 2x Synchronous LED Flash Intuitive Android Operating System 65 GB Storage; Space for thousands of digital images Fast data transfer via USB-C and Wi-Fi Rechargeable battery lasts a full day 180 x 77 x 27 mm 480 g Laser accuracy Accuracy under favorable conditions +/- 1 mm Range under favorable conditions 250 m Availability: Short-term Storage location: Hochheim With tripod adapter With device bag With DST 360 set including DST 360 adapter, TRI120 tripod, shoulder strap, and carrying case

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Bodpfxorw A Eis Addjlr Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 8044000703A, Siemens 840 D Control Country of manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Machine net weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Max swing over bed: 330 mm Swing over cross-slide (X): 260 mm Max turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Centre distance: 581 mm Feed drives Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Turret Number of tool stations: 12 Tool interface: DIN69880 (VDI 3425) Disc diameter: 30 mm Change time (with locking): 0.95 sec Change time (without locking): 0.4 sec Tool turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic travel: 396 mm Quill bore: flange Max quill force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow rate at 5 bar: 30 L/min Electrical connection Max power: 21 kVA Current: 400V Bledpfx Adow T Sqyjdor Frequency: 50-60Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Room temperature: +15 to +35°C Max humidity: 75% All information is provided without obligation and subject to possible errors or omissions.

Condition: good (used), Year of construction: 2007, Electric magnetic chuck including electronic pole reversal control unit, Blodpfslbggtjx Adder control unit and keypad complete Please contact us if you are interested !