Cold saw

KASTO KASTOdisc U10

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Can be tested under power. Dedpfswxw S Ijx Addscr

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Dcedpfx Adsmzbdwedsr

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm Dodpfxjvambco Addocr >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 2006, CNC cycle lathe WEILER E 50, year 2006 WEILER cycle control D3 Chuck 250 mm SCHUNK ROTA-S 250-62 Parat tool holder size 3 with 4 tool pockets Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle bore: 83 mm Dcjdpfx Adsxd Diusdsr Centre distance: 1000 mm Turning length: 1100 mm Spindle speeds: 1-2500 rpm / Motor: 20 kW For all further details, refer to the data sheets. Machine documentation and data backups available, machine under power and ready for demonstration.

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Dsdpfx Aswuddveddocr B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dcjdpfx Aexvv Tvedder Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: new, Model Name FALKEN R 1 Dcjdpfogvqxtjx Addor

Condition: new, Year of construction: 2024, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, cutting height (max.): 150 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. Dcsdpst I R Edjfx Addor - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Year of construction: 2023, X/Y/Z: 360/120/750 mm Bar capacity: 82 mm Djdpfsw Nxyaex Addocr 12-station driven tool turret C-axis Y-axis VDI 40 NC tailstock MK 5 with foot switch Foot switch for clamping on main spindle Air curtain Signal light Coolant device Chip conveyor Hydraulic holding brake ShopTurn Transmit function (cylindrical machining on outer and face surfaces) iXpanel (control system operation and organization extension) Gripper tray Small tool package

Condition: good (used), functionality: fully functional, Amada mod. Togu-EU sharpening machine with PLC for sharpening punches and dies of punching machines complete with accessories. Djdjt Daiwopfx Addocr