Kemper welding fume extractor

KEMPER SYSTEM 8000

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Blsdpfxezil Ive Amnoi Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Blsdpfx Aou Ttf Nsmnji Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Bodpfehpmawjx Amnoli Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. Bodpfx Aowxvadsmnjli The screw has been removed and cleaned.

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Bledpfevw Aqhox Amnsi

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Rotor diameter (mm): 480 Rotor width (mm): 800 Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock) Bledpfx Aerdgkcjmnei

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE Bledpjya Eldjfx Amnei • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Year of construction: 2003, condition: good (used), Used Granulator Herbold Model SML 35/42 Main engine 18.5kW Rotor length 420mm Rotor diameter 350mm blower cyclone +conveyor brand with metal decector machine 100% working Bsdpfxjvxi Snj Amneli

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Main motor with Brake System Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Bending capacity mm Roll diameters Ø mm Roll speed Bodjhpchyopfx Amneli m / min. (dk.) Motor power kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 IRM 1550 x 140 1550 4 140 3.5 2.2 4 / 7 / 9 / 13 2700 750 1000 1420

Year of construction: 2025, operating hours: 2 h, condition: like new (used), functionality: fully functional, DG 2660 E granulator, 15 kW, rotor width 600 mm, rotor diameter 260 mm, 3 rows of knives, V-cut, 2 rows of counter knives. With soundproof enclosure. Showroom machine, as good as new. Blodpjv Iqyxefx Amnji