Walking floor semitrailer

KNAPEN Schubboden K200 Top gepflegt

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Dcsdpfegcw Rijx Aizjp Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi

Condition: used, maximum load weight: 31,120 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 12,500 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 70 m³, Year of construction: 2021, Equipment: ABS, * Aluminum drop-side body * 1st & 3rd axle are lift axles * BPW axles * Aluminum rims * Roll-over tarpaulin * 4 toolboxes Dcjdpfxow Tqhde Aizjp * LED lighting system * Work lights German vehicle / German registration documents Our offer generally does not include inspection/emission testing and registration. Errors and prior sale excepted. Viewings are only possible by appointment. Internal number: 520 We speak German and English. Opening hours: Monday 8:00 AM - 5:00 PM Tuesday 8:00 AM - 5:00 PM Wednesday 8:00 AM - 5:00 PM Thursday 8:00 AM - 5:00 PM Friday 8:00 AM - 12:00 PM

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer – Rental Possible Type: CR 47 Chassis: Two fully automatically welded I-beams with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva Axles and Suspension: Disc brake 22.5", SAF axle units 3x 9t with air suspension. Axle spacing is 2 x 1310 mm. Lifting and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system. 1st axle is liftable without an air suspension module (SZM). 3rd axle is liftable with Wabco Optiturn. Rims and Tires: 6 wheels with tires size 385/65 R22.5, according to manufacturer's choice, on Alcoa Dura Bright aluminum rims 11.75 x 22.5 ET 120 Braking System: EBS 4S/2M WABCO air brake system with RSS, in accordance with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Gear: Mechanical landing gear with two speeds, 2x 20t support load with swivel foot at the rear, without support. Electrical System: All lights in LED design. 24-volt electrical system consisting of: One 15-pole socket mounted in front of the fifth-wheel plate on the chassis beam, yellow side marker lights in the required number, position lights at the rear, outline lights at the front, license plate lights at the rear, lights according to standard 97/28/CE-2007/35/CE. 2 multi-chamber lights at the rear at the height of the swivel bearing, mounted on aluminum brackets according to standard 97/28/CE-2007/35/CE. 1 LED work light on the container, yellow warning light at the rear, mounted at the height of the hose pipes. 2 reversing lights in the underrun protection, 2 reversing lights at the height of the supports (each can be switched off on the power console). Container Design: One horizontal container made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment container, with 47,000 liters volume. Container warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness is approximately 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80°. Filling Options: 4 manholes DN 450 with pivoting and folding dome covers. The dome covers are sealed with 4 wing nuts each. Rubber support for dome covers at the top for storage, closed front rain strip, open rear. Material Outlet: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for loosening. Material outlet cone can be pivoted to the side. Shut-off valve DN 150, with white seal. Connection: STORZ-A. Air Piping: One 2.5" stainless steel air collector line mounted on the right-hand operating side. One stainless steel air distribution pipe 4" is mounted at the rear of the container. Air valves (shut-off valves) in INOX. Upper air hose and air connection hoses are in 2" STORZ couplings. Micron filter, vacuum valve at the top of the container, 1 vibrator 1m in front of the swivel bearing. Ladder and Walkway: 1 aluminum ladder is mounted on the left-hand rear side of the vehicle. 1 aluminum safety scissor guard can be erected from below with a separate ladder flap and a locking brake when opened. 1 aluminum safety grating runs along the top of the container on the left side. Anti-slip coating on the container. Hose Storage: 4 hose pipe containers 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings. Hose containers with compressor hose D.76. Dsdpfjx Nufmsx Aizocp Accessories: The side underrun protectio

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Fliegl walking floor * EZ 06.03.2015 * 3-axles * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg * Tires: * 1st axle 385/55 R 22.5 v.l. 8 mm & v.r. 11 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 11 mm * 3rd axle 385/55 R 22.5 h.l. 10 mm & h.r. 9 mm * German trailer / German semitrailer * 1 vehicle owner / 1 owner * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting possible * Short-term license plate / customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki Dcsdpervu Snjfx Aizjp * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Djdpfx Aioi Riywozscp Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, empty load weight: 6,400 kg, maximum load weight: 28,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,440 mm, loading space height: 2,000 mm, loading space volume: 51 m³, total length: 11,400 mm, total width: 2,500 mm, total height: 3,650 mm, suspension: air, tire size: 385/65R22,5, color: grey, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, catwalk, grain outlet, supports Dcedpfsvhhvqox Aizop Body: Aluminum box body manufacturer Fudickar approx. 51.8m³ low pressure cylinder 190Bar, floor 7mm, side walls 30mm hollow chamber profile with 2.7mm inner wall thickness, front wall straight 4mm, rear wall as combination door (1/3, 2/3) with double bearing and steel frame incl. grain slider 400x400mm, replaceable rubber seal, saddle height 1,180-1,210mm, construction of the trailer like Langendorf! New vehicle from stock with daily registration on 08.06.2022! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! - .