Plasma cutting machine

KOIKE Deltatex 4000

Condition: used, functionality: fully functional, load capacity: 18,000 kg, lifting height: 11,900 mm, fuel type: electric, mast type: telescopic, construction height: 1,990 mm, empty load weight: 21,650 kg, total length: 5,540 mm, drive type: Elektro, construction width: 2,000 mm, Pick & Carry Crane Mast type: Telescopic Technical condition: good Front tires type: Non Marking Ihodet Dd Uwjpfx Adwjt Rear tires Type: Non Marking Remote control

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg Ihjdpfx Ajgulr Hedwet

Condition: new, Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9 Iedpfxod R Uz To Adwsht

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Ihedpew D Uqxefx Adwot Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: new, Year of construction: 2024, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. Iodpfx Ajfu Itbedweht • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: used, Year of construction: 2008, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, AMADA HFE2204 Pressbrake Pressforce: 220t Bending length: 4m Backuage: 4-axis backgauge system Iodpfx Adsw I Dmcowsht Clamping system: Amada

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm. Ihjdpotp Dhpefx Adwot  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Ihedsf Ey Auepfx Adwjt Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function - LED lamp

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Iodpfsf Alb Aex Adweht Working - Humidity max. 90%

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Ihsdev U Ea Hopfx Adwot Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.