Laser cutting machine

Bodor P3 6kw

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. Gjdpfxjxacdvs Apwska oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Gsdpfxsrq D Nie Apwska The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure Gkedjwh Ulqopfx Apwea 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Gjdon Tnzfepfx Apweka Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: new, Year of construction: 2023, New machine Gkjdjw I U D Espfx Apwoa Year of manufacture: 2023 Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: Short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm Gsdpsg Rgt Uefx Apwoka X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: new, Year of construction: 2025, Oven for the powder paint shop powered by natural gas. The furnace is designed for the polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of stainless steel AISI 1.4301, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Technical data: • Power supply 400V 50Hz • 2 x Riello 90kW burners • Operating temperature 210C • Maximum temperature 230C •High-class thermal insulation 150mm •Baffle in the middle of the stove allowing 50/50 Equipment: • upper transport, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the heating process of details), • Safe opening and closing locks, • timer module, • Thermoregulator (controls the temperature inside and maintains it at the right level), • The stove is equipped with rails for easy transport. Cbauevig73 pvxg CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Gkodefktipopfx Apwoa Feel free to contact us.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Gksdpfxofy T H Ie Apwja Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, BODOR laser cutting machines – top quality at top prices. -Easy programming – with service and training, installation, and commissioning. Gsdpfxsfbg Hbo Apwjka -Machines with power outputs from 3 kW to 30 kW. Easy to operate and suitable for both beginners and established companies.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Godpfev Ngraex Apweka Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.