Injection molding machine

KraussMaffei KM 1300-12000-8100 MXH

Condition: like new (used), Year of construction: 2004, COMPLETE PET BOTTLING LINE | 13,000 BPH Speed: 13,000 BPH at 0.5L 12,000 BPH at 1.5L Working hours: approximately 2,500 per year Blower SIPA 2004 Model: SFR12 Number of cavities: 12 Preform tipper. Air recovery Compressor NOT PRESENT Chiller NOT PRESENT Piping NOT PRESENT Included formats: 0.5 L – 1.5 L – 2 L – 0.66 L Air conveyor LANFRANCHI 2002 Saturator ALCIAMPIANTI 2006 Ozone generator PROCOMAC 1997 Filling monoblock PROCOMAC 1997 Rinser with 36 clamps Model: GRIPSTAR Isobaric filler, 48 valves Model: FILLSTAR PET 48.12 Functions: Sanitization De-gassing Capper AROL 12 heads – 2018 Bdjdpfx Aetqfg Hsddsk Model: TS EURO PK Cap types: Alaska Sport cap Hopper, elevator and unscrambler included Bottle inspector OMRON 2008 Level control Cap presence check Expulsion in case of defects Labeller P.E. 1997 Model: FUTURA 15T Number of heads: 15 Label type: wraparound Type of glue: glue Gluing system Nordson 2010 Conveyor belts PROCOMAC 1997 Shrink wrapper SMI 1997 Model: APET 143/D Type: film launch Packable formats: 3x2 4x3 6x4 Handler SMI 1997 Model: MAB 60 Number of lines: single Double reel magazine Palletizer TMG 1997 Model: SIRIO 2S1C Type: push system Interlayer system Pallet storage Pallet wrapper TOSA 1997 Model: 121 Type: rotating arm Functions: Pre-stretch Top sheet application Machinery has been serviced regularly, about once per year Last maintenance: April 2024

Condition: used, Payload: 0/16 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.03 mm Robot weight: 0 Kg Mounting: Floor Bjdpfx Adoihgpvsdodk

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Bdedpfotyyn Hex Addjk

Condition: excellent (used), Angel Victory 1350/220 Tech Closing 220 tons year 2004 Clamping plan WxH 860x830 Scrow 55mm 618 cm3 Cc 200 Minimum mold height 250mm Maximum 730mm Bedpfx Adspdrpzsdjdk

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Bdjdpfx Adjxluukodjk

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) Bodpfsw E Iumsx Addedk • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper Bdedpstu Hy Njfx Addek

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm Bjdpfx Aoxfvrwoddjdk • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 Bdodpfx Adov Hm A Todsk - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the Marker Arburg and the type 320S 350-60 Year of construction: 2000 Operating hours automatic: 83000 Screw diameter: 25 mm Clamping force: 350 kN Barrel length: 60 On request, transport can be organized throughout Europe for an additional charge. Price incl. VAT Bodpshhuq Aefx Addedk Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website