Krones Linatronic Empty Bottle Inspector (2004)

Krones EBI (Leerflascheninspektion)

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Capacity: Not provided Formats: 0.75 L Gourmet bottle 0.25 L Gourmet bottle 0.25 L Vichy bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems: Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth / finish inspection Sidewall inspection with LED illumination Detection of transparent films on bottle base and sidewall Scuffing detection via sidewall camera Residual liquid detection via infrared system and high-frequency detection Reject systems: Foreign container rejection at infeed Contaminated bottle rejection at discharge Separate rejection for bottles with damaged finish or thread Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit Transport height: approx. 1,050 mm Direction of operation: Left machine Ffedpoythznsfx Adaew

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Fjdpfx Adecx Smbeaofw Max. Pressure : 6 bar incl . electronic control incl . booster pump

Condition: ready for operation (used), Bottle formats: 0.125/ 0.2/ 0.5/ 0.75l, bottle shape: various, operational hours: ca. 35,000h. Fodpjd H Sg Tefx Adajfw

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15.10, total height: 2,500 mm, total width: 1,400 mm, total length: 2,400 mm, type of input current: three-phase, control voltage: 415 V, input frequency: 50 Hz, ic systems automatic bottle filling machine with conveyor. Model 5.5.1 Automatic Isobaric Microblock. Used for rinsing, filling and capping bottles. Ffjdjwg Sduopfx Adasw Suitable for beer, wine and soft drinks. Processes 500 bottles per hour. Fits crown caps of 26 - 29mm. Unit has 5 rinsing nozzles, and 5 filling turrets. NO VAT

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, We offer the filler Veral 60, Producer Nate Chotebor. The machine is prepared for filling of the beer. Machine after general repair of all elements - filler, closer and pump. The machine is prepared for next types of bottles - 500 ,660, 750 and 1000 ml bottle. Filling capacity 20 000 bph of 500ml bottle. Ffsdpfetrv E Ujx Adasw

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. Fjdpfxjw Hr Awo Adasfw The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Year of construction: 2020, Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled) Ffedpfx Aexnmv Eodajw

Condition: used, Year of construction: 2021, New Filling Monoblock Bertolaso 30/30/4 – PET/Glass up to 6500 bph Notice: Brand NEW Bertolaso monoblock, never used. Zero working hours. Pristine condition. The perfect opportunity to purchase a new monoblock at a used price. This new Bertolaso 30/30/4 monoblock emerges as an advanced technological solution, specifically designed to optimize filling operations for syrups filling system. Fsdpfovgucbex Adaefw Manufacturer and Model: Produced by Bertolaso, a benchmark name in the industry, this monoblock stands out for its performance and build quality. The model specification, 30/30/4, combined with its production year, 2021, provides crucial information on its current relevance in the bottling solution landscape. Speed and Capacity: With a speed of 6500 BPH, this filling monoblock Bertolaso can handle both PET and glass containers, ensuring accuracy and consistency in the filling process. Rinser: The rinser is equipped with 30 grippers and offers a single treatment. Filler: With 30 valves and a high vacuum filling system, it guarantees accurate and uniform filling of containers. The mobile nozzle highlights the filling monoblock Bertolaso’s ability to adapt to various operational needs. Capper: The capper of the filling monoblock Bertolaso, with 4 heads, is versatile in handling different types of caps, both aluminum screw and press-on plastic. Its ability to handle caps of various sizes adds further flexibility to the monoblock. Additional Features: Operational safety is ensured by various integrated features. The clockwise rotation direction and the electrical data (V: 380 and Hz: 50) emphasize the attention to technical details. The filling monoblock Bertolaso comes with manuals, which are essential for operators and maintenance technicians. In conclusion, the filling monoblock Bertolaso 30/30/4 monoblock stands as a reference point for industry experts, combining efficiency, safety, and versatility. Its technical specifications speak for themselves, underscoring the importance of choosing technologically advanced solutions in the bottling arena.   TECHNICAL SPECS Product: syrups Bottles: 700 ml glass Alexanderflasche – Ø 70,1/72,1 x 291 H mm – drawing AZ-01.019.01-03 700 ml Flakon PET – Ø 68,5 x 272,5 H mm – drawing 1304-01-002 1000 ml Flakon PET – Ø 76 x 298,5 H mm – drawing 3041-01-006 1000 ml PET – Ø 74 x 277,4 H mm – drawing 1709-01-003 700 ml glass Wodka – Ø 74,6/57,2 x 304,5 H mm – drawing 2807-02W1C 700 ml Vodka STD – Ø 74,6/57,6 x 304,6 H mm – drawing 2597S087  Maximum bottle diameter: 100 mm Minimum bottle diameter: 52±2 mm Maximum bottle height: 360 mm Minimum bottle height: 180 mm Minimum interior neck diameter: 18,5±0,5 mm (Ø 16 mm filling valve) Closures:      a) pilferproof aluminum screw cap – Ø 28 x H 18 mm on bottle n.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Model - SILVER 16/16 (16 x heads). Serial number - 528. Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until 14/10/2024, can be viewed working until this point. Ffsdpfx Adjulpmzjaow

Condition: like new (used), Year of construction: 2004, functionality: fully functional, COMPLETE ASEPTIC TETRA PAK TBA LINE Year: 2004 Output speed: 8,000 packs/hour Filling machine: Tetra Pak model TBA/21 TPA 500 SO Packaging type: Tetra Brik Aseptic (TBA) Format: 500 ml Prisma Speed: up to 8,000 packs/hour Aseptic filling technology: Hydrogen peroxide sterilization Packaging material feed: Roll-fed carton Touchscreen operator panel Cap applicator: Tetra Pak model TETRA PAK APPLICATOR 45 Cap type: TwistCap or LightCap Cap application: Fully automated Hot melt glue system: Nordson Problue 4 Cap elevator: Tecno Vibrazioni Packing unit: Tetra Pak model TETRA CARDBOARD PACKER 70 Ffedpfx Ajv Ay Uuodaew Secondary packaging: Tray or box packing Hot melt glue system: Nordson Problue 10 Inkjet coder: Videojet Coding type: Expiry dates, lot numbers Conveyor system: Total length approx. 65 meters