Krones Linatronic Empty Bottle Inspector (2014)

Krones EBI (Leerflascheninspektion)

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Kdjdpfezy Ud Ijx Adlet Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Kdodpfjtuyq Rex Adlet

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Kdodpfxjy Azq Ne Adljt Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Equipment - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) - Base inspection system - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data - Capacity: Not provided - Formats: - 0.75 L Gourmet bottle - 0.25 L Gourmet bottle - 0.25 L Vichy bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems: - Base inspection (camera) - Sealing surface inspection - Thread inspection (conical optics) - Mouth / finish inspection - Sidewall inspection with LED illumination - Detection of transparent films on bottle base and sidewall - Scuffing detection via sidewall camera - Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit - Transport height: approx. 1,050 mm - Direction of operation: Left machine Kdodeythznjpfx Adlot

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Ksdpfohix Ukox Adlodt

Condition: used, Year of construction: 2004, Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  - Output: up tp 50,000 bph - Last used for:  Kdjdpfx Aoxch Acjdlet - 0,25 l Vichy bottle - 0,5l Set 1 - 0,5l Set 2 - 0,5l Set 3 - 0,7l GDB - 0,75l GDB - Inspection modules - Bottom inspection camera - Sealing surface inspection camera - Thread inspection camera with cone optics - Side wall inspection camera - Contour detection and color detection with camera Accessories/scope of delivery    - Ejector - some spare parts available - some conveyors

Year of construction: 2016, condition: good (used), Item: M-3525-APV-Pump-W+65/350-235 STD APV Centrifugal Stainless Steel Pump Type: W+65/350-235 STD, Kdsdpfxekt Upno Adlet Year: 2016 2 pieces identical! 11 kW, 1450 Rpm Used!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, empty load weight: 1,450 kg, For sale is a Jumag steam generator with oil burner. Optionally available with gas burner upon request. The unit is in very good condition. Model DG 560. Year of manufacture: 2011. Steam output: 560 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Please contact us with any questions. Kedpfx Aeydnzijdljdt

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship Ksdpovrfivjfx Adlsdt - Automated machine Startup

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Kdjdsl Hx Adspfx Adljt