BLADE D=200X4,4/3,5X65 Z=36

LEUCO

Condition: used, Bore: 35 mm Kodpfowu Nxxjx Accjdl Cutting circle (ø): 125 mm Designation: MEC Length: 180 mm Material: steel Blade: strip planer knife Z4

Condition: used, Year of construction: 1997, - edge banding unit Kdjdpfx Acjd Inktscjl - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: used, Bore: 40 mm Swing diameter (ø): 125 mm Length: 100 mm Kdsdpfx Acjwrtb Escel Material: steel Knives: WP Z2

Condition: used, Bore: 30 mm Width: 3.8 mm Kodjtddxvjpfx Accedl Blade diameter (ø): 500 mm Material: Steel Blade: HW Z72

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school) Kodpfxeukcy Eo Accedl

Condition: used, Bore: 30 mm Width: 3.7 mm Cutting circle (ø): 494 mm Kdsdpfx Acjtddxrocel Material: Steel Blade: HW WZ Z72

Condition: used, - 220 x 14 x 70 mm, - Z8 + 8, - Quantity: 8 pcs, Kjdpfx Acelf I Iaocjdl Price per piece: €50.00 + VAT.

Condition: as good as new (ex-display), Carbide end mill Make prototype Kedpfjdwbklox Accsdl H 4 1200 17 10 2 10 x 22 / R 2 2 units available

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm -Number: 6 milling cutters -2x: left -4x: right -Price: complete -Weight: 4.6 kg/piece Kedpfsb A Sqgex Accedl

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3108-2AA29 Kdodovydbgepfx Accol -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5880 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Quick clamping system: Leuco with saw blade Ø 196 x 3.6 mm -Dimensions: 665/233/H235 mm -Weight: 48 kg

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Kodpew I Ug Hefx Accedl Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: good (used), wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO quick clamping system with wood cutter -Hole: Ø 35 x 75 mm -Saw blade: Leuco 250x4.0/2.8x100Z48 202062 -Number: 2x recordings available -Price: per piece Kdsdpfjvx Rt Hex Accol -Total dimensions: Ø 250 x 90 mm -Weight: 12.5 kg/piece

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 80 mm -Height: 20 mm Kodjciv S Ispfx Accodl -R angle -Support: Ø mm -Number: 2x milling cutters available -Price: per piece -Weight: 0.5 kg

Condition: used, Year of construction: 2014, operating hours: 11,517 h, Colour: Grey Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes Kdodpsx E Uk Uofx Accol - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Enclosed fence, Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - CNC documentation available: USB stick - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm Kdsdpfequft Tjx Accol -Weight: 0.9 kg