Building construction crane

Liebherr Turmdrehkran 33K

Condition: used, 100 m³ buffer tank made of steel, horizontal, in a frame Volume: 100,000 ltr Dimensions (LxWxH): 15,400 mm x 3,500 mm x3,500 mm Ijdpstv Rp Hsfx Abceap Insulation: 100 mm mineral wool, on all sides Wall construction: Insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: 1 x manhole for inspection work 1 x connection piece (supply and return (boiler)) 1 x connection piece (flow and return (consumer)) 2 x PT 100 temperature sensors

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 Iajdpfx Ajcggy Sjbcep - Total installed motor power KW 10

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Ijdpfx Ajw E Rfbobcoap Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: used, functionality: fully functional, The Layher AR O-ledger 1.09 m forms the horizontal connection between the vertical standards of a Layher Allround scaffold. The ledger carries the deck sections and provides stability and strength to the structure. Thanks to the rosette connection, assembly is quick and secure: just one hammer blow and the ledger is firmly locked in place. The length of 1.09 meters makes this variant especially suitable for narrow façades, stair towers, and refurbishment scaffolds where longer ledgers do not fit. These pre-owned ledgers have been technically inspected and are fully operational. They may show minor signs of use or discoloration but are otherwise in good condition—a durable and cost-effective choice for both professionals and rental companies. Applications - Refurbishment and façade scaffolds Iajdpfx Abew Ei R Aecop - Indoor scaffolds or stair towers - Scaffolding structures with limited space - Combination with Layher Allround standards and deck sections

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): 100,000 liter extinguishing water tank for underground storage, single or double walled, 1 manhole DN 600 with blind cover incl. seal and screws, outside with bitumen insulation - second-hand -... tank volume: 100.000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm weight: approx. 11.600 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. Iodpfx Aboi Enwvoceap An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 liters.

Condition: new, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 29689491504001, Only 2 units left for sale! With ignition system, complete The system consists of a high-performance wood gas engine coupled with a generator for efficient power generation. The plant is designed for stationary operation and is ideally suited for industrial applications, combined heat and power (CHP) systems, or emergency power supply. MAN inline 6-cylinder engine with generator: - Robust construction for continuous operation - Optimized combustion for natural gas or biogas Directly coupled to the engine - High efficiency for maximum energy output - Designed for three-phase power generation Electronic ignition for precise control - High reliability even under demanding conditions Performance: as per type certificate Voltage: 400 V, 50 Hz Control: Integrated engine and generator control system Iodpfx Absxxk Tpeceap High efficiency and long service life Maintenance-friendly design Adaptable for various types of gas Condition: The item was briefly installed but never put into operation. Therefore, it is new and fully functional.

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages Iajdpfx Aew S Ii Nsbcjp - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,700 kg, fuel type: diesel, color: original, power: 18.39 kW (25.00 HP), motor manufacturer: Perkins, maximum load weight: 1,000 kg, gearing type: automatic, axle configuration: 4x4, suspension: other, tire condition: 100 %, number of seats: 1, brakes: other, lifting power: 1,000 kg/m, shovel volume: 1 m³, digging bucket width: 360 mm, emission class: euro5, Equipment: additional headlights, adjustable chassis, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, pallet forks, rear pickup, standard shovel, NEW, PERKINS COMBINATION EXCAVATOR - BRAND NEW!! NEW!! NEU!! NEW!! NET PRICE: €18,900 FOR BUYERS IN THE EUROPEAN UNION!! FÜR KÄUFER DER EUROPÄISCHEN UNION!! THE MACHINES ARE LOCATED IN MAJSKE POLJANE, GLINA!! PRICE: €18,900 NET + VAT IN CROATIA. OUTSIDE OF CROATIA, VAT IS NOT PAYABLE!! WEIGHT: 2,700 KG WIDTH: 1.65 m LENGTH: 5.00 m HEIGHT: 2.40 m Ijdpow Tkmysfx Abcoap WORKING REACH OF REAR HYDRAULIC DIGGING ARM: 3.50 m DIGGING BUCKET: 33 CM. VARIOUS BUCKET SIZES, HAMMER, ETC. AVAILABLE FOR PURCHASE. FRONT LOADING BUCKET WITH QUICK COUPLER. 0.800 m2. PALLET FORKS, QUICK COUPLER!! I ONLY RESPOND TO SERIOUS INQUIRIES. PLEASE, SERIOUS CALLERS ONLY. NO EXCHANGES, NO ACCOUNTS, ETC. ACCEPTED. BANK LOAN OR LEASING OFFERS AVAILABLE UPON REQUEST. ALSO OFFERING: - KUBOTA: €18,900, approx. 3 tons - YANMAR: €27,900, approx. 3.7 tons

Year of construction: 1997, condition: used, machine/vehicle number: LWT 30, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 30,000 liter storage tank for the storage of water and wastewater as follows . This is a 30 cbm storage tank made of steel. Material S235JRG2 steel . Incl manufacturer certificate DIN and nameplate. The tank is cleaned from the inside and bitumen insulated from the outside. Suitable for underground as well as above ground storage. Tank dimensions : Length : approx. 9.900 mm Diameter : approx. 2.000 mm Weight : approx. 6.000 kg Shape : cylindrical Equipment : on request For the use as a fire water tank an additional suction line with A-fixed coupling according to DIN can be offered. Iasdpfx Abjc Nkyhocsp Of course, you can also co-design your tank system! All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you. General: All offers are valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system Isdpfx Abewz H Anoceap 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table