Gear hobbing machine

Liebherr LC150

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Pjdex Ezyvspfx Ag Tegi Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m Pedpfx Ajxwdwfeg Togi including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw including hydraulically foldable dresser including other small accessories including documentation without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Spindle hours approx. 25,900 h

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Pgedpfsifi D Tjx Ag Toi Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: excellent (used), Year of construction: 2011, CNC lathe Mori Seiki SL403B/800, year of manufacture 2011, Japan 2 axes - X axis 345 mm - Z axis 995 mm max spindle speed 2000 rpm Fanuc mapps MSX 500-IV control 18" Kitagawa B-18 (450 mm) chuck turning diameter 620 mm max turning length 958 mm Pgjdpfxjyffcte Ag Tei 12-position turret tailstock chip conveyor Renishaw probing system.

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Pgodpfx Ajua E Trsg Tji

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Pgedpfxsrx Sh As Ag Toi

Condition: good (used), Year of construction: 2017, operating hours: 10,963 h, functionality: fully functional, machine/vehicle number: ML0335-000100, turning diameter over cross slide: 400 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 12,600 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,693 mm, total length: 2,570 mm, total width: 1,595 mm, workpiece weight (max.): 300 kg, overall weight: 3,400 kg, bar passage: 67 mm, Equipment: documentation/manual, rotational speed infinitely variable, very stable roller-guided 2-axis CNC lathe with tailstock, suitable for both series production and single-part machining; Siemens 828 D control; interface for bar machining, parts catcher and ejector for automated processing; tailstock; chip conveyor; various tool holders; tool measuring arm. Pgsdpfx Aoydbqqjg Tei

Condition: used, Year of construction: 2004, Technical details: Pedpfx Ajxc E H Sjg Tegi max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Podpfx Agjw U Ry Nj Tsgi Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Pedpfowzypusx Ag Tsgi Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation