LIEBHERR LS 200F

LIEBHERR LS 200F

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm Rjdpfxsgq Dgdo Adrot ø hole table 39 mm ø table External centering Ø139,75 power tool motor (b) 4 Cv high 1.800 mm long 1.450 mm weight 2.450 Kg width 1.000 mm

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D Rsdpfx Adsvi Ninsrot work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the Rodpfx Ast Hw N Hjdret ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Rsdpfohrihyex Adrjt

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: Rjdpfx Adsyhwpwerjt We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: used, Year of construction: 1996, spindle passage 80 mm max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. Rjdexbtqvjpfx Adret - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Redpoyz Dwcjfx Adrjt Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Rsdpfjyrndmox Adrst Tool changer (overlapped-wheel system with tool-change arm) Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm Redpjcc D Ddjfx Adrjt pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, Year of construction: 2017, Technical details: grinding diameter: 280/320 mm Rodpsttxg Ssfx Adrot grinding length: 750 mm centre height: 170 mm weight of the machine ca.: 22,5 t dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m