MIG-MAG gas-shielded arc welder

LINCOLN STT II

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 Fjdpjwbil Sofx Ag Roft ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 Fjdpfxevxllke Ag Reft turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine with a just low special price. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Fjdpsxq Hhyefx Ag Rsft Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. Ffjdpow A Apyjfx Ag Ret control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: excellent (used), workbench, work table, assembly bench, assembly table, work table -Manufacturer: Garant Perschmann, workbench with vice, solid design with drawers -Worktop: approx. 1500/700/H860 mm Ffedpfx Agewk Dxxj Rot -6 drawers: lockable, division/height see photos -Vice: clamping jaws: 135 x 30 mm clamping width 185 mm -Transport dimensions: 1630/710/H1030 mm -Weight: 176 kg

Condition: like new (used), Year of construction: 2005, Welding machine pulse welder Elmatech Hybrid 4002, year 2005, unused new condition, with accessories, feed unit DV 39, water cooling, shielding gas, Ser.Nr.9401675, MIG/MAG standard welding pulse welding, MIG brazing, stick electrode welding, Fedpfx Agehwwhzj Rjft

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg Fjdpfxjxfzr Ne Ag Roft

Condition: good (used), Stainless steel pipe threaded screw conveyor screw auger Diameter 270mm Length 2400mm Motor power 2.2kW Ffedpfewyf N Dsx Ag Rst Entirely stainless steel See our other advertisements.

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V weight: 16,5 kg Fsdpob Nv S Sefx Ag Reft Space requirement: 720 x 320 x 410 mm