Barloader

LNS Quick Load Servo 80 S2

Condition: used, Year of construction: 2011, turning diameter 160 mm Hjdpeyuzfpsfx Abhep turning length 550 mm control Siemens weight of the machine ca. 9000 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Hjdpev Sdc Uefx Abhop

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Hsdpsx I Nikjfx Abhjp Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: used, Year of construction: 2018, x-travel 1300 mm y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D Hedoy Aphcopfx Abhep weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Hsdpfx Absy D Rypshsp Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,476 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 250 mm, spindle motor power: 22,000 W, controller manufacturer: INDEX, controller model: C200-4D Control, number of axes: 9, This 9-axis Index C100 was manufactured in 2012. It features a robust cast iron machine frame and a powerful main spindle with a maximum speed of 7000 rpm and a bar diameter of 42 mm. The machine includes three turrets with live tools, offering versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Index C100 horizontal turning machine we have for sale. Contact us for further details regarding this machine. Hjdpfx Aszcykgobhjp - Machine Frame: Cast iron machine frame in vertical bed design- Tool Carrier Guides: Plate guides with high level of rigidity and dampening- Axis Drives: Double-scissor kinematics for tool carriers; AC synchronous drive technology- Headstock Design: Thermo-symmetrical design- Main Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, front bearing diameter 75 mm- Main Spindle Power: 22/29 kW (at 100%/40% duty cycle)- Main Spindle Torque: 50/65 Nm (at 100%/40% max.)- Main Spindle Clamping Cylinder: Hollow clamping cylinder D42/14 for collet or chuck clamping, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- C-Axis Drive (Main & Counter Spindle): Hollow shaft motor, angular gauging system on spindle, resolution 0.00014 degrees, repeatability scatter Psmax = 0.01 degrees- Main Spindle Clamping Unit: Single pressure clamping unit, adjustable from 8 to 75 bar- Counter Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, collet chuck diameter 110 mm, front bearing diameter 75 mm- Counter Spindle Power: 16.5/19 kW (at 100%/40% duty cycle)- Counter Spindle Torque: 32/43 Nm (at 100%/40% max.)- Counter Spindle Slides (Z-axis): AC motor and ball screws drive, working travel 500 mm, rapid traverse 60 m/min, acceleration 10 m/s^2, feed thrust 3000 N- Counter Spindle Clamping Cylinder: Hollow clamping cylinder D42/14, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- Counter Spindle Clamping Device: Single pressure clamping device, adjustable from 8 to 75 bar- Tool Carrier 1: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 250 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 1 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 2: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 400 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 2 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 3: X-axis travel 125 mm (rapid 30 m/min, acc. 10 m/s^2, feed force 3000 N). Turret 3 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Hsdpsy Sg Dasfx Abhep Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Hodpfjy N R Ttjx Abhep

Condition: used, Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Hedpfezgcp Sex Abhep Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement Hsdpfx Aow Rdt Isbhsp • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.