Filter Device

LTA-LUFTTECHNIK i R

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Ncsdpfxodrc Txe Adwsl Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2001, inner diameter: 450 mm, wall thickness: 11 mm, overall weight: 3,200 kg, System: Decanter / centrifuge, used Manufacturer: Hiller Model: DP45-422 Mach. No.: 2818 Year of manufacture: 2001 Maximum drum speed: 3800 l/min Drum inner diameter: approx. 450 mm Drum wall thickness: 11.0 Drum material: H2/ST52 Weight: approx. 3200 kg Nodpfx Adevz A Uzswecl Permissible density 1.50 kg/dm3

Condition: new, Year of construction: 2023, New cast epoxy resin dry distribution 3 phase transformer manufactured by SEA Italy, 800kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked. Nodpsndn Hrefx Adwecl

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery Njdpfet E Dbysx Adwjcl No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide Nodpfewnd Dpox Adwjcl 4 tools incl. drill holders for rear machining

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a Garant tool presetting device, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Measuring accuracy: 1 µm Tool holder: SK50 Transport and loading can be organized across Europe upon request and for an additional charge. Nsdpsxf T R Rjfx Adwjcl Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Ncjdpfx Aeu Av H Dedwjl

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Model: ALDEC 406 Nedpfsvz Dddsx Adwocl Mach. No. 512-0006.01 Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided. Ncodowg Takspfx Adwsl

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Ncsdevu E Nujpfx Adwel Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth