Mailroom unwinding stations

Müller Martini 0350.0416

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Ljdoh Nrh Uopfx Aaneak Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions Lsdpfx Astryhfjanoak • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: good (used), Year of construction: 2001, Year of construction: 2001 Format: max 480 x 320 mm; min 200 x 110 mm mech. speed: 1.0 m/s Air requirement (at 6 bar): 5 m³/h Net weight: 4,100 kg (approx.) Ljdpfxeq Tcigo Aansak Equipment - Delivery right Strapping system - Strapex

Condition: good (used), Size: max 530 x 530 x 527 mm min 135 x 135 x 170 mm Product thickness: max 15 mm Cutting width: max 0-60 mm Equipment: • infeed unit with degree bumbers • cutting unit Lajdod R Tgzjpfx Aanek • 1 st cut station RS 173/530 • 2 nd cut station RS 133/530 • bump turn 1530

Condition: good (used), Equipment: 6x pieces Laedpfx Aed S Su Seanek

Condition: good (used), Year of construction: 1999, Year of construction: 1999 Format: max 480 x 320 mm; min 200 x 110 mm mech. speed: 1.0 m/s Air requirement (at 6 bar): 5 m³/h Net weight: 4,100 kg (approx.) Equipment Ledpfx Asq Tcgaeaneak - Delivery right Strapping system - Strapex

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Lsdpjl Dn N Sofx Aansak Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Working hours: 14.565 tsd. h Lasdpfxod N D Nhs Aanek Equipment: 1 printroll unwinding station 0350.412-353