Faceplate

1600

Condition: excellent (used), Year of construction: 2016, Schiavo Easy 1600.4 Max. Glas-height: 1.600 mm Thickness: 3-19 mm Mainwashingzone / drying zone Lsdsyr N R Uepfx Akmeru Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor Lrodpothuzpjfx Akmju - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 1600.4 Max. Glas-height: 1.600 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks Ledpfxovxf Uxj Akmjru incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm - Arbor flange diameter 87.5 mm - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg Lrjdpfezrk N Rex Akmju - Dimensions of folded machine 2020x3380x1200mm Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Ledpfxebql S Ho Akmjru Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800 Lsdpfezrpqyox Akmjru

Condition: used, In - Line Vertical Borer for Solid Rail Components etc Heavy duty steel welded frame 4 no Vertical Heads with Single Drills 2 no Vertical Heads with Triple Drills Motor power 3hp each. Pneumatic control for drilling stroke All heads adjustable along X axis via rack and pinion movement. Scale for positioning. Max. drilling between outside heads 1600mm. All heads with cross slide support & adjustment in / out Adjustable depth stroke to heads 5 no Pneumatic clamps - adjustable in lateral positioning. Two hand push button safety control. Lrodpfxozd Ur Hj Akmeu

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 * Lodpew Dud Ssfx Akmoru

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machine type Travel distance X Horizontal CNC machining center 1,626 mm* Travel distance Y Travel distance Z 1,270 mm* 1,016 mm* Table size Max. table load approx. 1,626 × 914 mm* up to approx. 4,536 kg, evenly distributed* Spindle drive Tool holder Geared spindle; 7,500 rpm SK 50 Tool magazine Cooling through the spindle (internal coolant) 30 tools Available Measuring probe Axis equipment Available 4th axis or preparation for 4th/5th axis Control Older Haas control Previous approximate value approx. 16 t Lsdpfx Ake Aa Npismjru

Condition: new, functionality: fully functional, machine/vehicle number: RR16HHE3L, Year of construction: 2026, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,715 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, power: 1.2 kW (1.63 HP), battery capacity: 205 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 170 mm, fork thickness: 65 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,165 kg, total length: 1,975 mm, total width: 836 mm, SCHORR HIGH-LIFT TRUCK, ELECTRIC, PRO 1600KG LOAD CAPACITY, 5M LIFT HEIGHT, RR16HH500E3L, FULL FREE LIFT - 1,600 kg load capacity, designed for demanding warehouse operations - Triplex mast with full free lift: lift even with a compact 2,185mm overall height - Proportional lift and lowering control: precise positioning to the millimeter - 24 V / 205 Ah lithium battery, easy to recharge - Low-maintenance AC drive, multi-function display, up to 16% incline - Turning radius 1,506 mm, only 836 mm wide: maneuverable in narrow aisles A powerhouse for your warehouse Heavy pallets, high shelves, tight schedules: The RR16HHE3L, with a 1,600 kg load capacity, is designed for demanding warehouse operations and reaches a lift height of 5.0 meters. Receiving, block storage, racking: You can handle the tasks of your warehouse with a single device, instead of switching between several machines. The substance behind it: solid chassis, stable triplex mast, polyurethane tires for continuous operation, and an electromagnetic operating brake that keeps the equipment and load safely in position in any situation. This ensures that the RR16HHE3L remains what your warehouse needs, even in multi-shift operation: a reliable device. Full free lift: full height, even under low ceilings Low doorways, narrow aisles, high shelves: this is exactly what the full free lift is for. The forks lift first within the mast profile without the mast extending even a centimeter upwards. With an overall height of only 2,185 mm, the RR16HHE3L passes through doorways and intermediate floors where extending masts would have long since collided and stacks to full height as soon as there is space upwards. The same applies throughout the warehouse: 836 mm overall width, a turning radius of 1,506 mm, and a working aisle width of 2,356 mm (pallet 800x1200 lengthwise). You can maneuver safely where space is tight: between rows of shelving, in the block storage area, or on the ramp. Millimeter precision, all day long The proportional lift and lowering control executes every movement exactly as you specify on the ergonomic tiller: quick lifting, sensitive and millimeter-precise lowering in the upper shelf level. This prevents pallets from being bumped and goods from being damaged, even with operators who have little experience. The low-maintenance AC drive operates energy-efficiently and handles inclines of up to 16%, and the multi-function display shows battery level and speed at a glance. The 24 V / 205 Ah lithium battery can be easily recharged at any time without a memory effect; the 24 V charger is included. And behind it stands the manufacturer itself: spare parts warehouse, its own workshop, personal advice. Technical data - Manufacturer (abbreviation): SCHORR - Manufacturer's type designation: RR16HH500E3L Lrsdpjzktyiofx Akmju - Load capacity: 1.6t - Model: 500E3L - Weight including batteries: 1165kg - Drive: Electric - Tires: Polyurethane - Overall length: 1975mm - Overall width: 836mm - Lift: 5000mm - Free lift: 1715mm - Lift mast height lowered: 2185mm - Lift mast height raised: 5445mm - Fork dimensions: 65mm x 170mm x 1150mm - Fork outside distance: 570mm - Working aisle width with pallet: 800x1200 lengthwise 2356mm - Turning radius: 1506mm - Travel speed with/without load: 5.0km/h / 5.5km/h - Lift speed with/without load: 0.13m/s / 0.16m/s - Lowering speed with/without load: 0.22m/s / 0.13m/s - Max. climbing capacity with/without load: 8% / 16%

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle Lredpfevtrc Sex Akmju maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Technical details: width: 1300 mm depth: 1000 mm height: 1600 mm weight of the machine ca.: 1950 / 1860 Stück kg 3pieces available (price per piece) Lsdpfx Aju Sq Ubskmeru according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *

Condition: used, Technical details: height: 1600 mm width: 1270 mm depth: 1000 mm 2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm * Lrsdpfxeu N Ea He Akmou

Condition: ready for operation (used), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Total height, working height: approx. 800 mm Weight: Ledpfx Aegq Nawokmjru

Condition: used, Year of construction: 1989, Technical details: table length: 1600 mm table width: 920 mm height over floor: 200 mm Ledpfx Aeu N Ebqokmeru weight of the machine ca.: 0,69 t Clamping table with 4x through holes Ø 22 mm Material cast steel T-slot according to DIN 650: T-slot spacing 250mm T-slot outer spacing (right and left) 120 mm a=22; h=38.5; b=40; c=18 mm T-slot length = 1380 mm *